A warm and reliable roof is one of the conditions for a comfortable environment in the house. It should keep the temperature, protect it from wind and moisture. The amount of heat loss can be reduced by using special insulation materials. Alternatively, insulate the roof in a private house from the inside with the help of mineral wool, which is the most common insulating material.
The process of roof insulation
For work you will need:
- gloves;
- hydrovisor protective membrane;
- Scotch;
- a heater (минвата);
- knife;
- a stapler;
- rails;
- self-tapping screws;
- drill;
- roulette.
- Thermal insulation of the roof begins with the installation of a hydraulic-shielding membrane. It is installed outside the room under the finish overlap, all joints are fastened with adhesive tape.
- The installation of the battens on the surface is carried out. Between the roofing and the rafters is installed a layer of waterproofing.
- Consider how to properly insulate the roof of the house using rolls of mineral wool. Measures the distance between the crate.
- The width of the strip with a knife is cut by 2 cm wider than the distance between the rafters.
- Minvata fits into the crate of the enemy.
- If necessary, cut pieces of material to bookmark non-standard participants.
- Thermal insulation fills the entire distance between the rafters.
- A layer of vapor barrier membrane is placed on top. It is lapped by a construction stapler and an adhesive tape.
- An additional crate is installed.
- The inner lining is attached to the lath. Warming is over.
Deciding how to better insulate the roof of the house , you can pay attention to various insulation : polyurethane foam, mineral wool, foam. The technology of laying them is similar. They will help significantly reduce the cost of heating the room and create a comfortable and cozy atmosphere in the building.
