How to make a kitchen set yourself?

Kitchen furniture in most cases is not assembled from natural wood , but from particleboard or MDF boards, fiberboard is also used. All this can now be ordered without any problems in any color solutions and sizes. Make a kitchen set yourself with ready-made cut plates and a simple tool is not too difficult. A fittings with fasteners for boxes and cabinets of any configuration on a free sale usually from the same firms that produce cutting.

How to make a kitchen set: master class

Many private furniture stores now offer not only ready-made furniture and the opportunity to design themselves. If you just need to update the kitchen set, and you can do it yourself, just order the parts and build the structure already in place.

1. So, for the kitchen, the design of the headset was developed, all measurements were made. On them at the enterprise cut out preparations, also all components are bought, so it's time to collect the kitchen.
2. Today, almost all furniture is collected on so-called dowels (these are chopiki). As a result, you will get a really reliable fastening, but the furniture will be already undivided. In order that all the holes for the chopiki were adjusted to a millimeter, we use this kind of fastening, similar to a clamp.
3. So, we do with a conductor two holes in the wall and bottom, respectively.
4. And here is the result.
5. Now we drive chopiki.
6. The box under the cupboard is assembled.
7. Next, we have to make their own directing guides under the drawers for the kitchen set.
8. Here the main thing is to check as accurately as possible the position and then to attach the guides. Approximately up to 3 mm can be considered a small flush, which will not become an obstacle to the normal operation of the system.
9. To the bottom we fasten the legs of the cabinet.
10. So, almost everything is collected.
11. Further the lower part is additionally fixed with screws, from above the clamp is installed. After the rear wall is fully assembled, the structure will become much stronger at times.
12. This is what the kitchen looks like at this stage.
13. Next, we'll look at the work with our own hands on the kitchen facades. We install on the inner wall of the mount, and on the outside handle.
14. On each of the kitchen facades for furniture made by themselves, in general it takes up to 20 minutes.
15. Install the side wall with a pre-made hole for the sockets.
16. Next, we expose all the cabinets and connect them with clamps. To make the kitchen set yourself, as tightly as possible in the junction of the cabinets, we press an additional wooden bar: this is a guarantee that after the entrance of the drill at the ends there will be no chips.
17. We fix the hinges under the doors.
18. Here is the preparation for the sink.
19. It remains only to fix it and tap.
20. Done!