MDF panels for ceiling - a fairly common solution, because this material is completely natural, resistant to various contaminants, it is easy to clean and can retain its presentable appearance for a long time.
Types of MDF panels
There are two main types of MDF panels that can be used for finishing the ceiling. In general, MDF is a material obtained by the technique of pressing the smallest wood particles without adding any chemical mixtures. The MDF panels differ only in the type of the top coating: they can be laminated or veneered. Laminated MDF panels are laminated on top of the main material by PVC lamination. Such a film can have any pattern and imitate any texture. Veneered MDF panels are covered from above with the finest layer of wood, obtained as a result of peeling or planing. Such panels have a traditional MDF coloring for a tree.
Facing the ceiling with MDF panels
Finishing the ceiling with MDF panels can, in principle, be applied in any room of a house or apartment. Most often for these purposes are purchased panels that have a color for wood plates. This allows you to create a very beautiful, textured suspended ceiling from MDF panels.
| | | |
For the use of MDF panels on the ceiling in the kitchen, it is recommended to choose options with PVC film applied on top. Such panels are less dirty, they are easier to clean, and the glossy laminated surface looks clean for longer, dust and plaque are not so noticeable on it.
| | | |
MDF panels on the ceiling on the balcony can be chosen as finished with a film, and veneered. For an unheated ceiling, more veneer trim is suitable, and for a heated loggia you can choose a laminated version.
| | | |
But for the ceiling of the MDF panels for the bedroom is better to choose it veneered panels. They are in appearance not inferior to the panels with lamination, but they have a completely natural composition.
| | | |
