How to connect a router through a router?

Many people are faced with the problem of a small range of wireless networks, which greatly complicates the use of netbooks , tablets, smartphones and other devices connected to the network. Such situations arise in apartments, offices and other premises. Buying a second router will not change the situation, because it requires a free internet cable. Therefore, you need to know how to connect the router through a router and whether it is possible at all. It is advisable to select a second router to connect the same company as the main one. So you will not be affected by the incompatibility problem when you connect.

Ways to connect

Of course, connecting one device through another will increase the scale of network access. You can connect the router through the router in two ways:

• through the cable;
• through a wireless network.

Both methods are easy enough. Choose one that you will be more practical.

How to connect the router to the router through the cable?

This method is the simplest. The only nuance is that the routers must be near. Let's find out how to connect the router to the router through the cable. To do this you must:

1. Buy the UTP cable of the required length. On both sides there are special plugs for connectors in routers.
2. We plug one end of the cable into the router, on which the wireless network is already connected to the "Internet" connector.
3. The second end of the cable is inserted into the LAN connector on the second router with the Lan2 mark.
4. We go to the "Network Management Center" through the control panel.
5. We click "Connections on the local network", then we call the properties.
6. Choose the type of connection "Dynamic".
7. After configuring the WiFi connection network in the usual way.
8. Save the settings and reload the main router.

Probably, such variant of connection will not work because of the conflict of addresses of devices. Therefore, consider another option of how to connect two routers through the cable:

1. We connect the ports of the device with a cable.
2. In the connection properties, disable the DHCP server.
3. In the "Local network" section we change the IP address of the main router to the second one.
4. Save the settings and restart the routers.

How to connect the router to the router via WiFi?

This way of expanding the network is more correct. To do this, the routers have installed WDS technology, which allows you to connect the router through a second router. Each router is a station of this technology and it needs to be properly configured to connect to other devices. If you do everything right, the question of how to connect the router to the router via WiFi will be quickly resolved.

First, make sure that your router model has the property of connecting via WDS. You can find out about it on the website of the model manufacturer. A router that connects to become a repeater. Set it up using the following steps:

1. Go through the control panel to the network connection properties.
2. Open the interface of the router.
3. In the "Wireless Mode" section, turn on WDS. Check this box.
4. Below, click "search" and you will see a list of available devices.
5. Choose the address of the repeater router and connect.
6. In the next window, enter the Wifi access key.
7. Save the settings.

A notification will appear on the screen about the distribution of the network and connection. Check the presence of a wireless network in other scales and connect. If there were no problems, then you were able to successfully connect the router through the second router and you can use the Internet. If you can not do this, then completely turn off the routers, reset the settings and reconnect. Refer to the manufacturer's website for help, because in the new router models there are some deviations from the usual schemes and their nuances.