Summer shower is a wonderful way to cool off during the hot season. The construction of the building with curtains and walls of the film will take about an hour. Following the simple algorithm, you will be able to build a more solid design, which will not need to assemble / disassemble each fall.
How to give a shower yourself: we build a frame
If you want to make a more "solid" shower, and not just a curtain booth, you'll have to try.
- Work begins with the erection of the foundation. It should not be deep, but strong enough to withstand the load from the tank on the roof and walls. It will take formwork. As a foundation, use a sand cushion with further pouring even lightweight concrete.
- Preliminary consider where the sink will be. The foundation is laid pipe, which is laid on the rubble, in the middle of the expanded clay, the top layer - again rubble. The pit itself can be covered with vegetation. At the end of the pipe, "plant" the net so that insects and small animals do not get there.
Consider all the details in advance in order to make the installation as simple as possible afterwards. On the roof, you can install the eurocube so that the water has time to settle after the well, and a flat tank . If you want, you can buy a running water heater or make a tank with heating.
- We begin to erect walls and floor. On the perimeter we fix the wooden beam, we make the floor covering.
- The turn of wall racks in height about 2 meters has come. Without additional wooden elements, located at an angle to the main pillars can not do, they attach a design of reliability.
- Since the humidity in the room will be high, a special hydro-protective film is needed. You can fasten it using a construction stapler.
- When the film is finished, begin to sheathe the walls. In this case, these are boards that will be painted in the future: simple to install, light in weight.
- Make several small windows in the wall.
How to make a warm shower in the country: finishing details
The skeleton itself is erected, but there are still several problems to be solved.
- What should be the roof? It is convenient to trim profiled sheeting: it is durable and very easy to install. In the place where the tank will be, additional supporting and fixing elements are needed. The weight of the tank is impressive. Therefore, you should protect yourself from potential danger.
- Walls are finished with PVC panels or tiles. If you have enough soul "from the watering can" then attach such a watering can and install a pallet. The design has turned out strong, therefore it is easy to install there a shower cabin.
In addition, there will be enough room to leave your things and with comfort to dress / undress, which is important.
- After all the manipulations you will get a great place to take a warm shower. From the side the building looks like this:
If you are satisfied with a shower in the open air type "with curtains," then beneath your feet will be a drain hole covered with rubble. The floor is a small beam located not in a dense, but 2 cm from each other. Any shower is best placed on the sunny side of your possessions. The tank should not be white, black fits best, since this color "accumulates" heat, the water will heat up in the minimum possible time.
How to make a shower in the country? As you can see, the system is very simple. You will need a minimum of skills, but the time spent is worth it. The whole family will be able to take a warm shower at the dacha without any problems. If desired, you can connect the hose to the tub and use it to water the garden or the garden.
