Today, among the many materials intended for interior and exterior decoration of walls, the block of houses is very popular. This coating is made of natural wood, so it provides good sound and thermal insulation, and helps to create a unique house design.
The process of finishing a block of house with your own hands is not particularly difficult. The whole technology is practically the same as the installation of the lining . In our master class we will show you how to make the inner wall covering of the walls with a house, without the help of specialists.
For this we need:
- block house;
- wooden slats;
- level;
- self-tapping screws;
- screwdriver.
Installing a house block with your own hands
- Before proceeding with repair, it is necessary to hold some time for the finishing material in the room, where the walls are to be trimmed, so that the wood has acquired the humidity of the room.
- To begin work on the installation of the house block by oneself it is necessary already when the walls are covered with a waterproofing film. This prevents the accumulation of moisture in the material and protects it from rotting.
- First we make a crate. With the help of screws we fix the wooden slats on the wall in steps of 1 m.
- We check the evenness of the crate level.
- Installation of the Hausa unit with our own hands starts from the bottom to the top. We fix the first row of racks.
- At an angle of 45 ° in the groove on the beam at the intersection with the wooden crate, screw a thin and long samorez (you can just drive a nail). This method of fastening is the most reliable.
- We check the level of the level.
- We continue installation of the house unit with our own hands, fixing each rack using special "locks" - grooves and a spike entering it.
- Each row is fixed with screws.
- Now that we have covered the block with the whole wall, you can open the surface with antiseptic and varnish to protect the material from insects and prolong the life of the material.
| | |
