Usually, for the cold season, the insulation of the floor on the balcony makes this uninhabited territory more comfortable. The installation itself is quite simple, and it can be done independently.
Warming of the floor with your hands on the balcony
In modern construction, insulation of floors can be made using several types of materials.
- Warming of balcony floors with foam (foam). Such material is often used in two layers with sheets of 5 mm. The pieces of foam are stacked between the lagoon balconies. On top of the slats are attached OSB plates.
A similar technology for insulating the mineral wool floor on the balcony in one or two layers.
- Warming of the floor of the glazed balcony with expanded polystyrene should be done on prepared lags.
Between them is often packed and foam, fixed with foam.
From the top on the logs is easily fastened foil polyethylene, it has high thermal insulation properties. It is fixed from above by racks.
The OSB sheets are fastened on top.
- To insulate the floor with expanded clay on the balcony, you will need polyethylene film, expanded clay, slabs GSP, soundproofing.
- First, the surface of the loggia is cleaned;
- cracks are filled with foam;
- soundproof tape is installed;
- laying waterproofing;
- a layer of expanded clay is covered;
- is aligned;
- The intermediate layer of SHG is stacked;
- poured and leveled the second layer of expanded clay;
- installation of the floor elements of the SHG on self-tapping screws and PVA glue;
- The edge band is removed and the floor is ready.
The floor after such installation will be warm, and you can feel comfort on the balcony in any weather.