In each bathroom there is a washbasin , which is usually supported by an ordinary bedside table. Curbstones under the sink are presented in many stores, but despite this it is sometimes difficult to find a model suitable for the size of the room. In this case, it is best to make a cabinet under the sink with your own hands. You dedicate a few hours to this, and the final result will be worth the effort.
How to make a cabinet under the sink with your own hands?
In the process of work you will find useful:
- wooden slats;
- screws and plastic dowels;
- a jigsaw;
- whole pieces of boards (for making doors).
The work will be performed in several stages:
- Calculate the dimensions, referring to the dimensions of the washbasin. In the case with the example described, the height of the bedside table will be 65 cm, the depth - 30 cm, width - 50 cm.
- Make two frames, relying on the depth and width of the product. From the furniture panel, cut out two sidewalls and fix them with screws to the frames. Remember that the lower frame serves both the legs and the frame of the product.
- From the shield, cut out 8 identical angles and attach them from behind and inside the upper base. In the first case, the side walls will be attached to the frame. This is done in order to make the bedside table more durable and give the design rigidity.
- In the front of the screws you need to fasten the decorative cover. It can be cut with a jigsaw from the board. At the same time, remember that there should be a small gap between the cover and the doors, which is enough to prevent the doors from climbing onto the cover plate.
- Attach a sink at the top of the product and adjust them to each other. If there are roughness and roughness, remove them with a jigsaw, sandpaper or sharp knife. The washbasin as a result should "sit down" with the smallest gaps.
- From a solid board, make two doors.
| | |
| | | |
| | |
Inside, drill holes for standard loops. Put the doors on the hinges.
| | |
| | |
