The choice of the fencing hedge is an important stage in the design of the suburban area. The installation of the fence from the corrugated board is a great idea in order to hide the territory from unnecessary eyes. It is considered the most optimal in the ratio of price and quality. Such structures are widely used in private housing construction, which is due to a simple assembly assembly and the possibility of secondary use.
The installation of the fence from the corrugated board can be done manually, without additional costs for specialists and special equipment. Profiled sheeting has a different height, thickness and ribbing, which will help to fit it into any landscape and panorama of the site.
Advantages and order of installation of the fence from the corrugated board
The advantages of this structure include the lightness and strength of the material, resistance to changes in temperature and humidity, inexpensive price.
The technology of fence installation from corrugated board with the help of metal supports is simple and uncomplicated. Installation does not require welding equipment. By and large - this is a designer, with the help of which it is easy to gather a fence yourself using self-tapping screws and a screwdriver.
To get started, you need to prepare the material, equipment, tools for mounting. To do this, you will need:
- Profiled sheeting;
- metal supports;
- transverse lags;
- brackets;
- self-tapping screws and drill;
- hand drill;
- rope, level.
- The first stage is the layout of the square. On the edges of the plot marking posts are installed. The rope is pulled at the height of the upper part of the guard.
- Marked places for the installation of poles, the distance between them is 2.5 m.
- In the marked places holes of 20-25 cm in diameter are made and depth is greater than the depth of freezing of the ground for a given area (approximately 1.5 m).
- Piles are installed vertically in excavated pits, the control is carried out by level. The height is checked by stretching the rope. The base of the pillars is concreted.
- The bracket is fixed at a distance of not more than one and a half meters from each other with the help of self-tapping screws for metal.
- For ease of work in the brackets made a hole.
- Cross metal lags are fixed and fixed by brackets. They allow for installation without the use of welding equipment, reduce installation costs and protect the fence from damage.
- At the top of the pillar, the caps are worn.
- Fence panels are installed using metal screws, horizontality is checked by level.
- There are panels in which cross rails are used with guides with grooves under the panels from above and from below.
- The upper guide is installed in the last turn and fixed with screws to the post.
- For beauty from above can be fixed decorative canvas. Its height must be taken into account when installing the guides.
- The fence is made of corrugated board. It combines high reliability, aesthetics and ease of installation.
The fence does not require subsequent care, as the material is galvanized and covered with a protective polymer from the destructive effects of the environment during operation.
The installation of the fence from the corrugated boarding house at the dacha will protect against unnecessary penetration and harmoniously emphasize the landscape of the territory. It will become a reliable fortress of the territory and will be in harmony with any interior thanks to a wide color palette, shapes and sizes.
