How to use the printer?

In the 21st century, printers and scanners managed to turn from office to home appliances. This office equipment today can be found in almost every home, where there is a PC or laptop . It would seem that it could be easier than learning how to use a printer. And those who think so, at the greatest expense, are right, but there are still some subtleties, which will be useful to each user, we'll talk about them.

Common Errors

To begin with, in general terms, we will learn how to properly use an inkjet or laser printer. The simplest thing is loading paper. Do not load the tray completely. If it is full to the top, the life of the paper feed mechanism will be significantly reduced. Often the owners of printers use used paper (already printed on one side sheets). In this case, make sure that only sheets with even edges are used, and carefully check for staples.

Owners of inkjet printers should remember that if the unit is not used for a long time, the paint may dry up inside the mechanism. This recommendation is especially topical for owners of printers with CISS system. To avoid this problem, it is recommended periodically to print color images, preferably in high quality. For those who do not know how to use the scanner perfectly, it is recommended to use the "auto" mode. Thus, the number of possible errors in the settings of equipment can be reduced to a minimum.

Helpful Tips

Printers , how to use them correctly, so that they serve longer? This can help users can have a few tips, which we will give further.

  1. If the laser printer has started printing with strips, then this is a sure sign that the toner runs out. However, if you remove the cartridge and gently knock on it, then you can print another 20-50 sheets.
  2. For owners of inkjet color printers, the color rendering quality can be improved by periodically printing large areas corresponding to the colors of the colors in the cans.
  3. The appearance of paint stains on printed documents is likely to indicate a pinched return pipe or a crowded container for waste excess paint.

We hope that reading this article will be useful for printer owners. Perhaps you already know a lot, but there will certainly be something new that you did not know.