Faced with the problem of how to whiten the bath at home, do not immediately run to the store to buy strong foreign cleaning agents. Some kitchen products in this case help not worse than expensive solutions, without damaging the delicate coating of a valuable plumbing fixture.
How to whiten the bath of yellowness?
Snow-white plumbing looks elegant and festive, but over time deposits form on its surface, and a problem arises as to how to whiten the bath thoroughly. Dirt can have different nature, depending on its composition, it is often necessary to experiment, to select for cleansing special drugs that are able to cope with the task. In the most difficult cases without the use of strong acids can not do. Thinking about how to whiten the bath at home, first determine the type of pollution.
The causes of the raid on the bath:
- Plaque, consisting of particles of skin discharge, dissolved street dust and dirt, fresh soap solution.
- Remnants of soap and other soap that have entered the enamel.
- A touch of light or yellowish hue, consisting of calcium deposits - it leads to increased water hardness.
- Yellow coating from rust - a high percentage of iron in water or the use of old stop valves.
- Dirty appearance of the plumbing is attached to the old enamel, mud immediately gets into the cracks of any origin, which can not be washed off in a simple way.
- Accidental contamination of the surface of sanitary ware by household chemical reagents, drugs or paints.
How to whiten a cast iron bath?
A simple and quick way to get rid of the grime that is stuck in the enamel is the use of modern cleaning products. To solve the problem of how to qualitatively whiten a cast-iron bath at home, a lot of excellent preparations have now been invented, but they must be used with caution, working exclusively in protective gloves. Some solutions emit a pungent odor, so do not forget to ventilate the room, wear respirators.
Popular means for cleaning enamel baths:
- Cillit Bang;
- Domestos;
- cleaning powder "Pemolux";
- Comet cleansing gel;
- bath cleaner Cif.
Old baths often can not be restored with cleaning preparations, the highly cracked enamel habitual methods do not work. This plumber is treated with nitro-enamel or two-component acrylic preparations "Stakril Ekolor". First, we remove the rust and all visible scurf with sandpaper, grinders, and then cover the surface with the selected composition. "Stakril Ekolor" has advantageous advantages - acrylic from BASF, when hardened, forms a smooth coating with high strength characteristics.
How to bleach an acrylic bath?
Acrylic does not rust, holds heat well, has acceptable strength, but it can easily be damaged by the surface treatment of a sanitary unit with hard brushes or other objects. In the case of how to bleach an acrylic bathtub at home, it is advisable to use both factory and folk remedies, but wipe the plumbing with a rag or a soft sponge only.
Means for cleaning sanitary ware from acrylic:
- Ravak desinfectant (Czech Republic) - diluted at home with water at a ratio of 1:10 or 1:50, depending on the degree of contamination.
- "TIM-PROS" - well removes bad odor, plaque, fat, fungi, viruses and bacteria from the acrylic surface.
- Cif - perfectly removes dirty deposits and smells of any origin. This tool is allowed to use on acrylic bathtubs, it is great for solving the problem of how to whiten the bath at home.
- "Cinderella" - is recommended for gentle care of acrylic baths.
- Triton - for safe washing of bathtubs, washbasins and showers with acrylic surface.
How to whiten a plastic bath?
To distinguish a modern plastic and acrylic bathtub is visually difficult, the difference can be seen only on the cut of the material. Modern bathing products are covered with a layer of acrylic up to 1 mm thick, giving them a beautiful appearance, strong structure and good technical characteristics. A serious task, than it is possible to bleach a bath in house conditions from plastic, we solve by means of those means, as for cleaning acrylic capacities for bathing. For this purpose, Bass, Acrylan, Cif, Cinderella, SanKlin, Triton and other similar preparations are perfect.
How can I whiten the bath at home?
Many users try to get rid of raids and dirt not factory solutions and powders, but using folk recipes based on simple kitchen products. If strong acids, abrasive powders, alkalis and aldehydes often damage the enamel, then soda or vinegar acts softer and safer for health. When planning to buy expensive and high-quality bleach for a bath, try to cope with this problem at home with home medications.
How to whiten a bath with vinegar?
Familiar vinegar copes well with many contaminants and even stale rust , but to get a good effect you need to spend a little time. Pour this whitening agent for the bath in the basin, we moisten the napkins in the liquid and cover them with all the problem areas of the plumbing fixture. We wait from 3 to 5 hours, remove the paper from the surface and thoroughly wash everything with warm water. Vinegar works best with calcareous deposits.
How to whiten a bath with soda?
Baking soda has a weak alkaline effect and is practically harmless to the skin, it can be safely applied to remove fresh specks or a small plaque. Carefully you need to behave with calcined soda, which is capable of producing a powerful effect. It copes with rust, old dirt, scum, fatty deposits, but can cause chemical burns. In the case, how to whiten the bath at home with soda, a variety of folk recipes are used.
Simple ways to remove plaque on the bath with soda:
- You can apply a simple baking soda or use a mixture of food and soda ash in a 1: 1 ratio. The container is wetted with water and a powder is applied, leaving it for half an hour. Further, dampened with a sponge in a vinegar, wipe the dirty areas, but do not remove the cleaning agent completely. After half an hour, completely rinse off the mud and work tools from the bath, rinse the surface with a warm liquid, wipe it clean with a clean rag dry.
- A strong yellow stain from rust can be tried to bring home soda and ammonia by applying a second solution to prepare the solution instead of water. Having received the required number of workers, we rub it into a dirty place and wait about an hour. We wash off the rests of the cleaning compound with water, wipe the bath dry. If you can not whiten the bath at home at a time, then repeat the process or slightly increase the waiting time.
How to whiten the bath with whiteness?
An available tool for removing dirt is always white, it can be used after surface treatment with soda, if the desired cleaning effect could not be obtained. After applying the solution, wait half an hour and rinse the surface with water. This bleaching agent for the bath should be washed off for a long time and carefully, it contains harmful components that can not be contacted with unprotected human skin. Try not to use whiteness at home for cleaning plumbing indoors more than three times a month.
How to whiten the bath with citric acid?
Citric acid like vinegar works well against limescale and rust, while being a relatively safe and inexpensive means. In simple cases, you can apply it in the bathroom in a dirty area and wait until ten minutes. If the completely yellow spot does not come off, then repeat the process several times, prolonging the contact time of the acid with the surface of the device. To clean the acrylic container from lime deposits, fill it with water, add 1.5 liters of citric acid, stir the liquid, wait 12 hours and at the end rinse the bath thoroughly with water.
In the question of how to whiten a bath, soda with vinegar and citric acid are the most common folk remedies that are often mixed together to enhance the effect. In case of severe contamination, we first rub the bath with a soda solution, and after 20 minutes we wipe the container with a sponge soaked in citric acid. Use only food, it is guaranteed not to damage the enamel surface. After half an hour we wash the plumbing with warm water, removing the remnants of homemade cleaning agent.