When carrying out work on the insulation of the bath, special attention should be paid to the ceiling. The ceiling in the bath should be a structure that prevents the formation of condensation and retains heat throughout the structure.
When proceeding to the installation of a ceiling in a bath, the following motives should be guided:
- Ensure the safety of the steam inside the steam room.
- Exclude heat from the room.
- Protect the attic from moisture.
- Prevent condensation on the ceiling.
Agree that it is not very pleasant, when drops of accumulated moisture will drip on your head at the moment when you relax in the steam room? That is why it is necessary to observe certain subtleties in the construction of a ceiling structure.
What materials are unacceptable in the process of arrangement of the ceiling in the bath with their own hands?
In order for the entire ceiling structure to fully meet all the requirements and standards, you need to choose the right material for it. In this case, it is absolutely unacceptable to use plywood, plastic or fiberboard. This is due to the characteristics of these materials, namely their low resistance to moisture, which is fully relevant to plywood and fiberboard. All attempts to protect such a coating from the effect of steam, which are reduced to painting with paint or paint, will cause the ceiling, under the influence of high temperatures, will emit toxic substances. As for plastic, it is not afraid of moisture, but the appearance of condensate on it is a constant.
What is the insulation of the ceiling of the bath?
In ceiling or log type baths, ceilings are almost the same structure, which consists of the following building materials:
- rolling covering;
- a heater (expanded clay or cotton wool);
- beams;
- rough ceiling boards;
- insulation from steam (parchment or film).
This layering is necessary to ensure that the overlap does not allow for the passage of heat and does not feel the harmful effects of moisture and steam. To the room itself looked aesthetically pleasing and convenient, the height of the ceiling in the bath should range from 2.1 to 2.3 meters. If there is an attic in the structure, then the technology changes somewhat. Ceiling boards need to be covered with a 2-cm layer of clay, and as a heat insulator a 15-cm layer of wood chips implanted in the cement solution acts. If such a thermal insulation of the ceiling of the bath does not cope with its load, and the condensate does appear, the layers need to be thickened.
Ceiling in the recreation room of the bath
All of the above applies equally to the insulation of the ceiling in the restroom. Such costs are necessary to maintain the integrity of the entire structure and to prevent damage to objects in it from moisture and heat. So, for example, installation in a rest room of audio and video equipment, lighting devices and upholstered furniture is widespread. All this requires a person who has risen before the problem of how to make a ceiling in a bath,
It is worth noting that the design options for the ceiling in the bath are a great variety, from the most modern to the ancient and time-tested ways. However, as practice shows, each structure has its own characteristics and subtleties of construction, so the owner needs to be careful and calculating when choosing a particular arrangement of the ceiling, walls or floor in his bath. It is better, of course, to shift this business onto the shoulders of an experienced master and an inveterate bath attendant, but it is possible to do everything by your own power and intelligence.