Decorative plaster with own hands from ordinary putty

Sometimes there is a desire and a need for change. And often this applies primarily to our home. For this, it is not necessary to make cardinal changes to the interior, the general mood of the room can be changed with the help of small adjustments. For example, with the finishing of walls of decorative plaster from ordinary putty. Smooth walls give the interior a little uniqueness, unlike their textured finish. In addition, you can produce this very finish yourself with the help of ordinary putty.

How to make decorative plaster from the usual putty?

Let's take a step-by-step look at how with the usual putty you can make an original decoration of the wall from decorative plaster .

1. First you need to prepare the wall. The wall must be level, pre-treated with starting putty and primed.
2. We prepare the background of our exposition. To do this, we mix not the fine consistency of the finishing putty and color it in the desired color. Then we put it on the wall. Decorative plaster from the usual putty can also be applied with a roller. You can also use paint for these manipulations. However, picking it in one color range with putty is difficult enough, so experts recommend using the latter.
3. Ideally you do not need to make a wall. Try to avoid large influxes and all. After the background of the walls, allow them to dry well.
4. For plaster from the usual putty we prepare decorative elements. In our case, it will be leaves. To do this, we need a few twigs with beautiful and even leaves and a diluted soap dishwashing liquid. Tear off the leaves of the legs and bed in soapy water.
5. The leaves of chestnut have a brown coating, which then can remain on the decorative plaster from the usual putty. Therefore, we wash them with a regular brush and water.
6. Carefully cut off the leaf with a knife, so that it closes as close to the wall as possible, while retaining its shape. Then the finished sheet is also sent to the soap solution.
7. On the background layer of exposure, apply a small fresh layer of ordinary putty, to which we apply leaves that can give it the appearance of decorative plaster. Using a roller, we smooth out the leaves and throw out excess material from under them.
8. On top, gently smooth with a spatula. In places where the filler dries up, it must be wetted with a spray gun to prevent scoring.
9. Our wall is all in leaves. We will shoot them. As for a day they dried up, for this we need a sponge soaked in water.
10. Carefully, not hurriedly remove the leaves, without tearing, as we turn the edge off the edge. At the same time you can help yourself with a stationery knife.
11. The result is an interesting textured sheet fingerprint, which is a decorative plaster from the usual putty.
12. After the wall has dried nazhdachkoy 150 gently remove the burrs, if any.
13. For the composition to be completed, the wall is covered with wax. And that's what we get.

This way, with the help of not tricky manipulations you can decorate your house. By the same principle with the usual putty the walls can be treated with Venetian decorative plaster. Do not limit your imagination. Based on the above material, you can easily realize the original ideas you invented. This will make you proud, as a created masterpiece, and by yourself.