Often the fungus in the bathroom spoils the appearance of the room and fashionable tiles, beautiful design, expensive furniture can not save the situation. In addition to the unsightly appearance, mold is a great danger to the health of adults and children, so fighting it - an indispensable component of care for the room.
What is harmful about the fungus in the bathroom?
To the reproduction of mold causes increased humidity in the room and a lack of ventilation. Miniature spores of the fungus are present in the air and, finding themselves in a favorable environment, begin to grow intensively. Black plaque negatively affects the dwelling itself:
- destroys building materials, which is fraught with a collapse of structures;
- deteriorates the appearance of the finish.
In addition, mold spores from the air through the respiratory tract easily enter the body of a person in a room. Fungus in the bathroom can cause:
- attacks of headache;
- allergic rhinitis ;
- nausea;
- respiratory tract diseases - bronchitis, tracheitis, asthma;
- skin rashes, dermatitis, psoriasis ;
- inflammation of the joints, rheumatism.
How to prevent fungus in the bathroom?
To further not fight mold, you need to take preventive measures so that it does not appear in the room. How to avoid the fungus in the bathroom:
- Provide the room with good ventilation - install the hood, after bath procedures it is better to keep the door open for a while.
- If the heat transfer of the towel is not enough, you need to install additional heating equipment. This is especially important in autumn and winter, when the humidity is high, and the temperature is low.
- Wipe the surface, in time to get rid of condensation.
- Carry out preventive treatment of walls and ceiling with special compounds.
How to remove the fungus in the bathroom?
The place of its habitat fungus in the bathroom can choose any surface - from wood to plastic. When moisture overcomes the mark of 90-95%, its spores, getting into a moist environment, begin to germinate. Small black or greenish specks can turn into vast foci that grow in volume. To the colony does not spread throughout the room, you need to pick up a remedy for the fungus in the bathroom and process the surfaces. The mold is put in different places, for each specific case you can use your method.
Than to remove a fungus in a bathroom on a tile?
To remove mold from the tiles, you must use a strong disinfectant. How to remove the fungus in the bathroom on the tile:
- Creosote is a powerful aggressive remedy. It is a strongly smelling, burning, oily liquid, for dilution of which alcohol is used. The affected surface is treated with creosote solution, then thoroughly wipe with detergent and water.
- Take a couple of spoons of tea tree oil and two cups of warm water. Spray the solution on the affected surfaces, do not flush it. To process a tile is better for the night, when nobody uses a bathroom.
How to remove the fungus on the ceiling in the bathroom?
If the fungus on the ceiling in the bathroom is wound up, the solution to how to get rid of the misery should be taken depending on the degree of damage to the surfaces. Light pollution can simply be treated with antiseptic solutions, and deep ones must be removed radically. How to clean the fungus in the bathroom on the ceiling:
- From whitewashed places, whitewash and plaster are removed. The ceiling is covered with an antiseptic primer, then it is leveled with acrylic putty and decorated with a finishing coat - paint, whitewash.
- If there is no need to repair, you need to treat the ceiling with a whitening spray, then clean the black with a brush. The antiseptic will kill the mold without leaving a divorce.
Fungus on the walls in the bathroom - how to get rid?
To destroy mold spores on surfaces, first remove the blackened surface layer, dry the affected area with a hair dryer, then treat with an antiseptic. Prepare it easily from improvised materials. How to remove a fungus in the bathroom:
- Excellent remedy for removing fungal colonies in the bathroom - table vinegar. It is safe for health, although after use in the room there remains a specific smell that quickly evaporates. When removing mold, vinegar is applied to the walls using a spray gun, left to dry. After an hour, they wash it off with clean water. For preventive purposes, problem areas are advised to be sprayed once a week with vinegar.
- Copper sulfate removes mold well from the walls. It is easy to use, but toxic, you need to work in a respirator and gloves. Copper sulfate is diluted in a combination of 100 g of powder per 10 liters of water. The solution is applied to the walls with a brush for 4-5 hours. After the surface you need to wash, dry, and ventilate the bathroom.
- Often used to destroy mold. To do this, it is mixed with water in equal amounts and sprayed onto the infected area. After several hours, the mixture is washed off. The product has a strong odor, so it is desirable to work with ammonia in the respirator.
Than to process seams in a bathroom from a fungus?
Often the mold in the bathroom affects the seams between the tiles . The reason for this - the evaporation and moist means that are used to wash the tile. Fungus on the seams in the bathroom is easy to remove, and bleach blackness with soda and vinegar:
- pour the vinegar into a container, apply it on the seams with a brush and leave for 5 minutes;
- pour baking soda into the bowl;
- with a toothbrush, dipping it first into the water, and then into soda, it is necessary to walk along the seams, carefully cleaning the black plaque;
- After washing the surface with a sponge with water and detergent.
How can I clean the fungus in the bathroom?
Finding a fungus in the bathroom and deciding how to get rid of it, you can use the store compounds, or apply popular methods to combat mold. Ready antiseptics contain antimicrobial and antifungal ingredients. Fungicides - "Isocid" and "Dali" - are effectively treated with mold. "Antifungus" - an effective tool, suitable for any material, even wood. As a prophylactic it is added to the putty, paint, wallpaper paste. If you do not want to use aggressive chemistry, you can use folk methods to combat mold.
Peroxide against the fungus in the bathroom
In the medicine cabinet you can find another effective and effective remedy for mold - hydrogen peroxide. It has antibacterial properties, has no smell and color, excellently copes with the destruction of small fungal colonies. She can clean the tile, brick or concrete, destroy black raids on furniture, rubber and plastic surfaces. Do not forget that the composition has a light whitening effect and take it into account when clearing dark textures. How to wash the fungus in the bathroom with peroxide:
- the composition of the spray gun must be sprayed onto the walls, the seams soaked in a rag can be processed;
- after 15 minutes, rinse the solution with a damp sponge.
Ultraviolet against black fungus in the bathroom
Mold is afraid of ultraviolet rays, so black fungus in the bathroom is destroyed by UV lamp. It kills all microorganisms, including spores of mold and bacteria. To process, you need to turn on the lamp, send it to the moldy place. The procedure lasts about half an hour, at this time all household members must leave the room, also clean plants, aquarium, animals, and the door is tightly covered.
In half an hour you can enter the bathroom, black spots will still decorate the walls or ceiling, but the fungi and their spores will be already dead. It will be necessary to dry this place with a hair dryer and clean the mold residues with a soft brush. Ultraviolet rays can not penetrate deeply into the plastered wall and destroy the fungal deposit only on the surface.
Remedy for removing fungus in the bathroom
Get rid of the colonies of the fungus will help any detergent based on chlorine - stain remover, bleach, for example, Domestos. With its help it is possible to carry out treatment of problem spots for the purpose of mold removal and prevention. Whitening agent is used to clean the floor, walls, tiles. Domestos from the fungus in the bathroom is used as follows: it must be diluted with water in equal parts, applied to the affected surfaces and rinsed with seams.
Periodicity of treatment - every 2-3 days for 2-3 weeks. It is important to continue to wash Domestosom surface once a month, even after visual traces of the fungus are no longer observed. Work with him in gloves, so that the product does not corrode the skin. It should be remembered that under the influence of chlorine, some materials may lose color.