How to whiten a bath with simple improvised means?

The dilemma of how to whitewash the bath is troubling the owners, from whom it eventually turned yellow, was covered with rusty smudges. After all, the comfort of taking water procedures with such a plumbing can be forgotten - it has an unsightly appearance. With the help of simple and affordable methods, you can get rid of yellowness and rust and rejoice in the snow-white cleanliness of the bath.

How to whiten the bath of yellowness?

Even with the most caring housewife, the plumbing eventually becomes bloated. The reasons for its occurrence:

• hard water;
• high concentration of impurities;
• rusted water supply systems;
• aggressive action of chemical compounds.

It is important to know how to whiten the bath at home so that it again shines with Alpine purity. The method of cleaning should be selected depending on the type of finishing layer of the plumbing itself - acrylic , enameled or cast iron . This is recommended in order to cover the bath is not damaged, because the appearance of microcracks will contribute to its contamination in the future.

How to bleach an acrylic bath at home?

This modern plastic does not tolerate brushes with a metal coating and hard abrasives, suffers from acid and alkali. How to bleach an acrylic bath without spoiling its surface:

1. To give clarity and shine to the acrylic layer, you can use only creamy or gel-like compounds with a mild effect. Suitable liquid detergent for washing dishes.
2. Shining whiteness bath will get, if it draw hot water and dilute in it a double dose of oxygen bleach for laundry. The solution should be left in the bowl for several hours or at night.
3. Calcareous stone can be removed with acetic solution: pour so much water into the tub to cover the plaque, add vinegar (1:10). Leave the solution for 12 hours, then rinse thoroughly.

How to whiten a cast iron bath?

The durable cast iron surface has a significant disadvantage - it is porous and with time its microcracks fills the dirt and rust. To clean it, almost any means, abrasive and even containing aggressive chemical compositions based on alkalis and acids are suitable. How to whiten an old bath of cast iron:

1. Calcined soda - when removing yellowness, a budget assistant. It is necessary to moisten a hard sponge, pour a lot of money on it and thoroughly rub the walls and the bottom of the product.
2. It is advisable to apply chlorine bleach - pour liquid liquid onto a sponge and treat the bath, after a time wash. It will well clean up the fat spots, the old dirt.
3. When deciding how to whiten an old bath, it is advisable to use a powder mixture of equal parts of bleach, soda and vinegar. Gruel must be lubricated with unsightly places and left for half an hour. Before you wash off the mixture on the surface you need to walk with a stiff brush.

Than you can whiten the bath?

When deciding how to whiten the bath enamel, it is appropriate to use it as ready-made products with abrasive, chlorine-containing, acid-containing substances, or more sparing or folk. Some of them are better at removing fats, others are excellent at rusting, and some clean up the dirt well. The advantage of folk methods is their safety for respiratory and skin organs, accessibility and soft impact. The choice of the agent depends on the degree of contamination of the surface of the bath. To achieve excellent results, you may have to make a whole complex of cleaning activities.

How to whiten a bath with soda?

When deciding how to whiten the bath, it is advisable to use baking soda. This active substance is distinguished by a strong and simultaneously sparing effect. When asked whether it is possible to bleach an acrylic bath with soda, the answer is not desirable. The product contains solid particles, because of active washing on the surface easily formed scratches, which later converted into cracks. Soda is best used for sanitary ware with white enamel coating.

To whiten the bath to shine, you must perform simple actions:

1. Moisten the walls of the bath.
2. Dirt with a dry soda and dry sponge rubbed into it.
3. After 30-40 minutes, rinse with warm water.
4. To get rid of the old deposits, you can mix the calcined and baking soda in a ratio of 1: 1.

Whiten the bath with citric acid

If rust or lime scale is eaten very firmly, then recommend using lemonade. It is known for its bleaching properties. The advantage of citric acid is that it is even suitable for solving the problem of how to whiten the yellowed acrylic bath. You need to do the following:

1. Dilute 2 bags of citric acid in half a liter of water.
2. Apply to a soft sponge.
3. Treat the entire surface of the bath.
4. After 30 minutes, when the acid dissolves the dirt a little, the coating should be cleaned in a circular motion with the hard side of the sponge.
5. Rinse with plenty of water.

How to whiten the bath with vinegar?

Deciding how to whiten the bath from rust and dirt, you can take another effective way. This will require table vinegar, the method is suitable for both cast iron and acrylic surfaces. How to whiten the bath at home using vinegar:

1. Dampen a lot of paper napkins with vinegar.
2. Put the moistened paper over the entire contaminated surface.
3. Leave the bleaching agent on for 4-5 hours.
4. After the napkin must be thrown away, and the plumber should be washed with clean water.

How to whiten the bath with whiteness?

Return the bath cleanliness will help the usual bleach. It is evenly distributed with a sponge over the walls and bottom of the product. Leave it for a few hours - a minimum of 4, a maximum of 8. After the time the bath is washed with a large volume of water. "Whiteness" contains chlorine, so it is not recommended to use it for acrylic coatings. There is another recipe for how to quickly whiten a bath at home using bleach:

1. Moisten the surface with water and a sponge and apply soda on it for 15 minutes.
2. Mix 50 ml of vinegar and whiteness and apply the solution to the first layer.
3. After an hour, everything is well washed away.

Whitening products for bath

Deciding how to whiten the bathtub, you can use and ready-made store products, the choice of which in the modern market is huge. The most effective and well-known of them:

1. Bass - a liquid product, is sold in the form of a gel, it contains weakly concentrated acids. Suitable for all kinds of baths, including acrylic. It helps not only to solve the problem of how to whiten the bath from yellowness and dirt, but also relieves it of microbes.
2. Ciff - a universal cleaner for all plumbing, is available in the form of cream and spray. To whiten the bath from yellowing and plaque, it is necessary to apply it for 5 minutes and thoroughly rinse. The composition does not damage the enamel and perfectly copes with various impurities. But against old rust, it is not very effective.
3. Sannox - perfectly copes with organic deposits and various deposits, including rust. In addition, the composition helps to get rid of pathogenic bacteria and unpleasant odors.
4. Comet is a popular remedy, produced in the form of a spray and gel. It not only removes lime deposits and stale dirt, but also creates a dirt-repellent film on the walls. But the composition does not cope with rust very well.
5. Phenolux is an effective preparation, it easily removes dirt and plaque, copes with rusty stains. Its peculiarity is that the composition works immediately after application - it is not necessary to withstand it for a certain time on the surface.