Many mistresses choose plastic windows . Modern, practical, easy-to-maintain windows made of PVC (PVC) have long proven their superiority over conventional wooden frames. However, not every hostess knows how to care for plastic windows, as well as the better to wash them, in order to preserve the appearance and functional properties.
Immediately after installing the new windows, you need to make sure that they completely removed the protective film. The fact is that the sun dissolves the glue, and then remove the film without a trace will be almost impossible. In addition, immediately wash the remnants of the assembly foam and cement. If they harden, during the removal you will scratch the frames and glass.
In the majority of cases, in the first five to seven months, new windows glisten the owners with brilliance and purity, and then the owners suddenly notice that dirt and dust begin to accumulate on them. The decision is made right away - my plastic windows! But not everything is so simple, because mistresses usually admit a number of typical mistakes, leading to the gradual deterioration of metal-plastic bags.
Errors when washing plastic double-glazed windows
For a long time without thinking, we take in the pantry the first powder which has come across and assiduously begin to wipe the mud stains, the stale dust. However, detergents for plastic windows should not contain abrasive particles, because soft plastic and glass will immediately be covered with microtscripts. In these channels unnoticed for you, dirt will clog even faster, and it will hardly be possible to remove it from there. Your windows even after washing will look gray and not well-groomed.
A variety of acids, nitro compounds, alcohol, gasoline - this is not what can be washed plastic windows, because the aggressive substances contained in them dissolve the protective coating of the glass unit.
It is important in this case, not only the fact, what means to wash plastic windows, but also the sponge to which you are doing it. Too tight sponges act in the same way as abrasive detergents, so use a better cellulose napkin or a regular rag. It is not superfluous to emphasize that knives, chisels, screwdrivers and other sharp objects are bad helpers.
My windows are correct
Nothing is complicated in how to properly wash plastic windows, including outside, no. First remove all moisture and dirt from the drainage channels. This procedure should be carried out not only for aesthetic reasons. Clogged channels will prevent the windows from tightly closing, so a puddle may appear on the windowsill.
The PVC windows are light enough, so the wind can loosen the fasteners. Check all screws and screw them if necessary. Then, wipe the frames inside and out with a piece of microfiber or other soft cloth moistened with water with a small amount of non-abrasive detergent (dishwashing liquid).
Despite the abundance of means for cleaning glass, a good effect is guaranteed by the grandfather's method. Litre of water, 50 milliliters of vinegar or 100 milliliters of lemon juice - this solution wipe the glass. When they dry, wipe dry with a paper towel or newspaper.
Due to heavy loads, loops and other mechanisms should be periodically inspected, lubricated with petrolatum or engine oil. To the windows pleased you for decades, retained the basic properties, wash them at least three to four times a year. As you can see, washing windows does not require much effort.