The remote control (DU) is an incredibly convenient thing, and it's unclear how we lived before without them? With his appearance we have one problem less, although sometimes there is another, no less important - how to set up the remote control?
How to set up the remote control?
The ideal option, of course, will be if the remote control you set up a service wizard. But if there is no such possibility, then you can try it yourself. We will try to help you with this.
Setting up the universal remote for the TV
To configure the universal remote for the TV , do the following:
- To start, you need to turn on the TV, because the setting happens when the TV is working.
- Press the SET button on the remote and hold it until the LED next to it starts blinking.
- Take the code table (in the instructions) and drive a three-digit code that corresponds to the brand of your TV. For each brand code can be from ten or more. When the code is entered - the LED blinks, and after you have already entered it, it continues to just burn, but already smoothly, without blinking.
- Then you need to check the operation of the console, only without using the numeric buttons. Those. try to add or reduce the volume, switch the channel. If the remote does not work, then enter the following combination, and so on until your console starts to switch channels or adjust the volume.
- After the code is selected, press the SET button again - this will allow you to remember the operating mode.
Your remote control is set up, the LED is no longer on, but only when you press any button on the remote. Now you can easily turn on and off the TV, add and lower the volume, switch channels, select the source of the video signal. In a few words, you can use all the buttons.