Block house for internal works

The term block house sounds somewhat unusual, but on closer inspection it is found that we are dealing with a wooden lining, but made using the latest technology. At the moment, it is the most optimal choice for those consumers who have decided to decorate their home in the style of a classic farmhouse.

Advantages of the inner plating of the block house:

1. This material does not release harmful chemical compounds. On the contrary, for people suffering from respiratory diseases, a block of houses in the form of interior decoration is ideal. You will fill your home with the smell of pine forest, and the possible causative agents of respiratory diseases will still be destroyed in the bud by natural volatile antiseptics.
2. Panels have special grooves and spikes, which greatly facilitate the process of assembly.
3. The internal block of the house is a relatively light material and it does not exert a significant load on the walls and ceilings.
4. The lining made of wood serves as a good insulator against extraneous noise.
5. Walls covered with block house, breathe.
6. The thickness of the board is 2-4 cm, so it is an additional insulation for the room.

Some shortcomings of the interior decoration of the block house block:

1. If we compare the cost of wood and plastic, the calculations will not be in favor of the wooden house block.
2. Careless installation in this case results in a high percentage of damaged panels.
3. Wood is a combustible material.
4. Obligatory processing of the house block with antiseptics, which prevent decay and the appearance of fungus .

Choice of house block for interior work

This material on quality is divided into two main classes - "A" and "B". The first is more expensive, but it is preferable. Here, a smaller percentage of visible damage, wormholes and resin pockets are insignificant. Class "B" is inferior in its characteristics, but it is not a marriage. The size of knots for such products does not exceed 45 mm, and various cracks are allowed not more than 1 mm in length. Pay attention to the resin pockets, they are also able to spoil the appearance of the lining.

Hausa block fastening

It is impossible to allow the protruding hats of nails or screws to spoil the look of our wooden lining. Now more often for this purpose, instead of nails, use kleymers - special bracket-holders. If the thickness of the panel exceeds 21 mm, then self-tapping screws are used, which are screwed into the spike at an angle.

Docking corners is always a big problem for beginners. Some masters produce a saw at an angle of 45º, masking joints with various putties for wood. Other people use decorative lining specially designed for interior and exterior corners. This method is good in that these wooden corners are less deformed when humidity drops, rather than the panels of the lining. You can customize the boards to each other on the template. This method is very laborious, but its results look very nice. The latter method is slightly simpler - it is the use of a planed bar, which is installed in a corner, and later semicircular panels join it.

Block house for interior work in the interior

Wood itself looks good, but it also fits perfectly with such common materials as stone , metal or glass. Forged candlesticks, chandeliers or other details of decor in such an interior will always be superfluous. Quite easily in such a room to realize the style of country, Provence, create the atmosphere of a hunting lodge, a noble manor or a peasant hut. In addition to the living room, the block house is great for a sauna, sauna, as a material for finishing balconies and loggias. A modern block of houses designed for interior works, can turn an ordinary house into a fairy tale, which will become a pride for its owner.