Home slippers can be very cozy and warm, especially if you make them yourself. In the cold winter, warm slippers, ballet shoes or slates that are not usual for us, are better, but real home soft boots. Today we'll figure out how to sew such slippers by yourself.
As a result, you should get such lovely home boots:
Materials for work
The main material is fleece.
For soles of house boots, you will need: fleece (4 parts), plaschevka for the surface in contact with the floor (two parts), sintepon or thin batting (2 parts) for insulation.
For the heel-toe piece: fleece (4 parts), sintepon or other insulation (2 parts).
On the boot will leave 4 details of fleece. Insulation in the boot is not used.
Decoration - fleece in one layer.
House slippers: master class
To understand how to sew slippers for home slippers is not at all difficult. We will cut out and sew together the details of the "external" boot, the stable, holding the mold, and the inner soft "lining".
1. To sew home slippers, you will need a pattern.
The most difficult thing in building a pattern is the size.
Sole
With the sole everything is simple - just traverse the foot, without bending the pencil under it.
Approximately in size 37-38, the length from the center of the toe to the center of the heel should be equal to 26 cm. Now we recede from the outline of the drawn foot 2 cm and draw a second contour. Additional two centimeters are necessary for us for a sintepon - the heater takes sometimes more than one size.
It is on the second contour that the pattern is cut off.
The foot-heel part
The toe-heel part is cut according to the drawing (1-1) taking into account that the length from the toe to the shaft is the same for all sizes (from 13 to 14.5 cm), and the height from the heel to the shaft is 6.5-7 cm .
The lateral line (the lateral bottom seam from the center of the toe to the center of the heel will be obtained) should be equal to the length of the line of the pattern of the foot from the center of the toe to the center of the heel.
Golenishche
The top is cut out as a rectangle with a width of 32 cm and an arbitrary height. In our boots, the height of the shaft is 18 cm.
Decoration
For decoration, we need the details in the form of circles (flowers) and the length of the strip of fleece (assembly).
We cut out ready-made patterns from a dense cardboard.
2. We cut out details from a fleece and a heater.
| | |
3. Now start assembling the parts.
The foot-heel part
Each detail is a "sandwich" made of a layer of fleece and a heater. We fasten "sandwiches" and we spread them on the typewriter.
Sole
Just we spend and "sandwich" soles. Only to it the layer of a plaschevka is added.
We should have 4 ready-made parts:
Tummy and forefoot
Now it is necessary to connect the toe-and-pin parts with the shaft. The bunches are not sewn yet, so after sewing, the back seams of the bootleg must be sewn, leaving the upper seams not sewn (through them it will be necessary to unscrew the product).
So we sew both the outer boot and its inner part, separately from each other.
| | |
Sewing soles
After that, sew the soles into all 4 parts, as in the picture:
We should have two boots. One with a heater, holding the form, and the second is completely soft.
4. Connecting parts.
Now we connect the hidden parts with the hidden seam:
It remains only to decorate the boots with the help of such pretty flowers or ribbons of fleece:
We got very nice, soft and comfortable house slippers-boots, which we made with our own hands.
According to the above pattern, you can also tie slippers with your own hands, it is enough to tie individual pieces of pattern and connect them with each other.