Photo wallpapers of the German company Komar are high quality in combination with the original assortment. These wall-papers, despite the fact that they are applied to the usual paper basis, do not lose their beautiful original appearance for many years.
Kleim wall-papers Komar own hands
Some people think that it is necessary to glue wall-papers of Komar, as well as any others, however it is not absolutely true. In order to paste such wallpaper correctly, you need to observe some nuances.
- Typically, in order to glue wallpapers mosquito, you need these materials:
- wallpaper, glue;
- containers for dilution of glue;
- plumb or level;
- Brush or roller for glue;
- spatula for smoothing the wallpaper;
- pencil, knife.
One of the secrets of successful sticking of photo wallpapers is perfectly flat walls without cracks , bumps and other irregularities. First of all, you need to remove old wallpaper, skirting boards and sockets. Now, if necessary, you need to level the wall and primetrovat it. In the room where the wallpaper is glued, there should be no drafts, and the temperature - about 20 ° C. Begin to glue the first sheet from the center of the wall. Before this, you should mark out the wall by drawing a vertical and horizontal line using a level and a pencil. Often are interested in what glue you need to glue wallpapers Komar. If Komar did not have glue in the kit, then, as practice shows, it's better to glue on any one suitable for paper wallpapers. Lubricate the first fragment of photo wallpapers and, without waiting until it becomes wet, immediately glue it strictly on the intended line. With a roller or spatula, we carefully smooth the glued sheet from the center to the edges. All the following canvases should be overlapped overlapping, according to the drawing and going to the previous sheet about 2-3 cm. Using a sharp knife, make slits for sockets and switches. In the end we install skirting boards.
