How to make a turntable of paper?

Favorite children's entertainment, which can be done on their own. Making a turntable from paper does not require much time or skill. We offer a few simple ways how to make a merry turntable of paper.

Origami paper "turntable"

Fold the turntable from paper will be even a beginner. As a result, you can get two different options: with sharp edges or even. To work, you will need sheets of colored paper.

1. We put the sheet with the colored side down and fold it in half.
2. Now we straighten it again.
3. To the center, it is necessary to break the upper and lower corners on the right.
4. Then fold the sheet again in half and bend the upper corner to the center.
5. We turn and repeat the procedure.
6. To make a squash, press the center axis inside.
7. The first part is ready.
8. By the same principle we produce seven more blanks.
9. We take two figures and put them one in the other.
10. At the same time one of the sides should be in the form of an open valve.
11. We connect all parts to the end.
12. In the end we connect the first and last details.
13. The spinner in the origami technique made of paper is ready.

Paper turntable

A sheet of white paper can make entertainment for the child in a different way.

1. A sheet of paper must be square. Fold it diagonally and cut off excess.
2. We mark the lines of diagonals. From the intersection, put it 1cm.
3. We make cuts along these lines.
4. Take the upper left edge and bend it to the center.
5. We do this with the rest of the parts.
6. It remains only to attach the workpiece to the axis. In the role of the axis you can use carnations, and attach the whole structure to a wooden stick.

How to make a turntable from a double-sided paper?

In the store for creativity, you can always get a bright two-sided paper. This will save time significantly. You will also need a wooden skewer for shish kebab, a bright button, glue and scissors.

1. Before making a turntable from paper, dip the skewer in the water and leave it there until the end. This way you will avoid cracking the tree.
2. From paper cut out a square of 10x10cm and add it on the diagonals.
3. Mark off the center of 1-1.5 cm and do notches.
4. With a clasp we make a hole in the skewer.
5. We pierce the holes in the four corners and bend them to the center.
6. Between the skewer and the turntable you can put the washer, then it will be better to spin.
7. To the hilt of the hammer, glue the button and everything is ready.

How to make an unusual paper turntable?

Very interesting looks toy with eight blades. It is more elegant and can be made in many colors.

1. On paper, draw a sketch for blanks.
2. We transfer everything to a colored sheet of paper and cut it out.
3. We combine two colored blanks in such a way that the grooves of one enter the grooves of the other.
4. Then everything remains the same. We make holes on the corners and bend them to the center.
5. Fasten the structure with wire and beads.
6. We wind the wire and fix it on the skewer. Then we put on an oval bead.
7. Alternately string all the corners with holes and press them with small beads.
8. At the end we fix everything with wire. Thus, the turntable will rotate better.

How do I make a circular paper revolver?

This is the simplest option and the most interesting. If you pick bright colored paper, it will turn out very nicely, and the baby can be trusted with part of the work.

1. Under the scheme we draw the outlines of our workpiece.
2. Then cut out the outer contour.
3. At the end, make a cut in the center and bend the semicircles.
4. In the center we insert a bead and we fasten all on a skewer.
5. For fixing we use the familiar method with wire and beads.