Rubber shoes are incredibly popular in the off-season. Yes, and in the gardens in it is much more convenient to water and weed beds, because no dirt and moisture is not terrible. With proper care and choosing a manufacturer, such shoes will serve you more than one year. However, no one is immune from damage to even dense rubber. We offer two simple and affordable ways how you can glue rubber boots.
Care of rubber boots
To prevent such a nuisance, you should take good care of rubber shoes. After all, even very good manufacturers can not guarantee you the safety of boots, if they are not properly maintained.
First of all, we learn how to clean properly. To wash off rubber shoes, it is enough to take warm water, a soft cloth and quite a bit of glycerin. Then the appearance of the product will be preserved for a long time. Do not forget to properly ventilate the boots to avoid the development of the fungus.
After cleaning or use in very rainy weather, never put shoes on the battery, dryers and do not use a hairdryer. Dry only in a warm dry place or in a warm wind. If you have purchased a model with a light or white soles, the usual school eraser will help to make it new again.
Than you can glue rubber boots - the classic method
Even if you very well watched your rubber shoes, sooner or later it can deteriorate. In this situation, it is quite logical to ask whether it is possible to glue rubber boots , or have to go to the store for a new pair?
You do not need to panic, because it is quite real to seal such a product. You do not even have to seek help for repairs. Of the materials and tools used, you will need glue, solvent, patch (it is usually cut from old cameras from bicycles or strollers).
- Shoes should be thoroughly washed and dried, as discussed in the rules for the care of rubber boots.
- Cut out the size of the board. In addition to cameras from bicycles, old rubber boots are quite suitable.
- Then, with the help of a solvent, thoroughly degrease the surface of the shoes and the plank itself. Make sure that there are no pieces of cotton wool or thread from the rag on the treated area.
- To fix the patch, we use a rubber glue such as Super moment for rubber. If you want, you can simply go to any nearby shoe repair point and ask the master to sell you some special glue for a symbolic fee.
- First we put the glue on the shoes and patch, hold it for a while, then fix it. The aging time is usually indicated on the tube.
- To the patch held as tightly as possible, it is usually a little taped with a hammer or something similar.
How to glue rubber boots - an alternative
Sometimes the method with the patch is disappointing and you have to look for what else you can put rubber boots on. If you saw through the time that the hole could not be closed, go to the sports goods store. Many bicycle owners claim that a more reliable way to repair rubber boots, if they broke - use a repair kit for bicycle tires.
- We select the patch according to the size.
- The place where you plan to fix it should be treated with sandpaper. Degrease is not necessary, but if desired, the use of acetone is allowed.
- Glue from the set we process the site on the shoes, then removes the protective film from the patch and also apply a layer of glue.
- On the packaging we find the holding time, wait and attach the patch to the shoes.
Whichever method you choose, it is better to put on boots in a day, when the glue is completely dry and will seize well.