The ceiling is an important part of the interior, so it should always be in perfect condition. If, for some reason, whitewashing has lost its attractive appearance, it simply needs to be restored. Moreover, this method of finishing is the simplest and cheapest. Consider how to whitewash the ceiling with the least effort and minimum pollution of the room.
How to whitewash the ceiling with whitewashing?
The most difficult stage in repairing the ceiling is its preparation. However, this can not be done without, otherwise through the new layer of whitewash all the flaws of the previous coating will be visible, which will nullify all your efforts.
So, you need to remove the entire old whitewash without a trace, and also remove all traces of dirt, then - to level the ceiling.
When removing the old whitewash you can use a damp sponge and soapy solution. It is easy to remove the soaked whitewash with an ordinary spatula, and to reduce dirt in the room, hang a small tray to it, where whitewash will be poured.
The removal of the calcareous layer, in contrast to the Cretaceous layer, is more complicated. It will be necessary in the literal sense to tear off the spatula from the ceiling. Determine whether chalk whitewash in front of you or lime, you can just by passing your hand over the ceiling. From the chalk on it there will be a white trace.
Remove the remaining dirt from the ceiling with a sponge soaked in warm water. After that, apply a 10% solution of copper sulfate to the cleaning site.
The next stage will be the leveling of the ceiling. For this, a glue putty is used, consisting of chalk, gypsum and joinery glue in a ratio of 1: 2: 2. Stir it should be with water in an amount of 50 g per 1 liter of water. Apply putty manually with a spatula. You need to conduct first across the seams and cracks, then - along.
When the glue dries, it is necessary to carefully treat the whole surface of the ceiling with pumice or fine sandpaper. It is necessary to use a respirator so that fine dust does not get into the lungs.
After grouting, the ceiling must be primed, so that the whitewash is better adhered to it. As a whitewash for the ceiling is suitable chalk and lime. The use of water-based paints rather refers to the painting of the ceiling, and not to its whitewashing. It is better to whitewash the ceiling - to choose you, because both chalk and lime give good results. Before the whitewash begins, the ceiling looks like this.
To answer the question - how to whitewash the ceiling without a divorce, you can advise you to use not a brush, but a roller. It will give an impeccable surface. First, apply whitewash in the direction of the light from the window, and then - across. Then the marks from the roller will not be visible.
| | |
In order not to use stools or stairs during work while you are trying to whitewash the ceiling, you can use the telescopic handle to the platen. With it you can reach the ceiling from the floor.
| | |
