Facade panels - an excellent, no less reliable alternative to natural coatings. A more affordable price is an added bonus.
Characteristics of the material for the installation of facade panels
This finish has a thickness of 2-3 mm.
The stiffeners make the structure resistant to mechanical influences.
Facade work on the installation of panels do not cause difficulties due to a double locking system. Stops eliminate deformation.
The variety of textures makes it possible to create a unique facade.
The color scale is amazing:
The following tools will be required for the work:
Technology of installation of facade panels
- Carefully inspect the facade, all preparatory work must be completed. If the basis of wood, treat it with antiseptics.
- Determine the lowest and highest point of the wall along the horizon using the water level.
- It is recommended to arrange additional insulation. Vetroparoizolyatsionny layer is done with an overlap of 10 cm.
Next, the crate is made of wood or galvanized, the step is not more than 40 cm. It is "embedded" insulation , the top is a diffuse membrane.
- For fixing facade panels, install a crate of galvanized profiles. On the perimeter of the building, mark the horizon line to install the starting elements. The further step of the elements depends on the selected type of cladding.
- The first row of panels is set to the start profile, for corners, corner slats are needed for the J-profile openings.
- Installation is made from left to right, from the bottom up, the outer panel of the row is not less than 20 cm. Each row is arbitrarily displaced for the purpose of dressing. The first row is installed on the profile-start, fixed with screws in the center of the holes. The panel is inserted into the grooves of the "neighbor" and again fixed with screws.
- For docking with the roof you will need J-panels.
For the corners special "nozzles" are provided.
You will get a great result:
