Every woman wants to have a neat and beautiful manicure, but do not spend a lot of time and effort. Slider design for nails satisfies these desires, and also greatly simplifies the procedure of drawing stunning drawings. Moreover, this kind of manicure allows you to save money, because it does not need to visit the master to perform it, it is easily done by yourself.
Water stickers-sliders for nails
The described devices are original "translations" - on a special paper there is a very thin film with a pattern that slides when placed in warm water. It is carefully transferred to pre-prepared nail plates, and after drying, cover with a fixing layer of clear varnish.
Paper for the slider-design of nails consists of a cellulose base with a thickness of 200-220 g per square meter, an adhesive layer through which the image is fixed on the surface, as well as an ultrathin polymer film. It is worth noting that such material can be purchased in its pure form, after which it is possible to print out the desired patterns on the laser printer, creating its own unique design.
What is the design of nails with sliders?
There are 3 types of stickers:
- transparent;
- on the entire surface of the nail plate;
- tight drawing.
In the first case, bright pictures with clear boundaries are displayed on the sliders. They are designed to decorate an already prepared manicure, they are used instead of hand painting, which allows you to save time considerably.
Stickers for the entire surface of the plates are considered the most convenient, since it does not require pre-treatment of hands. It's enough just to carefully cut pieces of paper that fit in shape and size, and transfer them to the nails.
Sliders with a dense pattern, usually applied when doing French manicure or with a monochrome color of nails. The pattern is applied to the transparent film, but the lines are very close to each other, forming a kind of thin lace.
How to use sliders for nails?
Depending on the type of stickers chosen, their application method differs.
The easiest way to use sliders on the entire surface of the nail. You need to gently cut them, align the top layer and put the base. Preliminary it is necessary to prepare labels, cutting them out of a paper. After the substrate dries, you must place the sliders in warm water and remove the polymer film with a pattern, this can be done with tweezers. The figure should be placed on the nail, starting from the cuticle and ending with a free edge, it is recommended to spread the film with a cotton swab. When processing, it is important to make sure that the pattern does not slip and that air bubbles do not form under it. You can cover the image with usual clear varnish, gel and biogel, shellac.
Transparent sliders differ little in the way they are used. Only in this case, more thorough preparation of nails is required. After performing the manicure and applying the base color (preferably - light and not pearly), similar to the previous description, transfer the pattern to the nail plates and fix them with any coating. It is important to note that this type of design does not require cutting out the slider according to the shape of the nail.
Labels with high image density are applied in exactly the same way as the two above described species. Only with this type of manicure you need to accurately cut out the drawing either on the entire surface of the plate or on a limited area so that the borders of the pattern are neat and sharp.
You can use slider-stickers on the nails with a design during the build-up , under gel-lacquer and even on ready-made tips. They perfectly hold, providing an ideal manicure for 2-3 weeks.
| | | |
| | | |
| | | |
