Warming of an attic in a private house with your own hands

Regardless of the way you plan to use your attic , its insulation is mandatory. Firstly, in this way you save most of the heat in the house and reduce its losses at times. Secondly, the insulation of the attic floor in a private house allows you to get additional useful space in the house, which also saves money, because you do not have to build another floor.

Stages of attic insulation in a private house

1. Work always begins with surface preparation. Carefully remove all debris and dust, if possible even wipe the surface. First, we will insulate the floor of the cold attic in a private house. First of all, we lay a layer of vapor barrier according to the technology indicated on the package.
2. Then we put on protective equipment, a respirator and gloves, and we are engaged in unpacking of a heater. We will lay it between the beams. It is important that the stacked sheets fit tightly to each other when docked, but lay freely.
3. Rarely when one has to talk about the insulation of an attic in a private house with their own hands in one layer. As a rule, after laying the first, the beams for laying the second layer are additionally mounted. Laying goes in a perpendicular direction.
4. Separately, it is worth to touch the work with pipes when insulating the floor of the attic in a private house. This can be pipes for different purposes, but they should never contact directly with the heater. To this end, we buy a special insulation material and plastic clips. If the pipe changes its direction, we cut out the insulation parts at an angle of 45 °, and tightly join the two parts.
5. Another important nuance in the matter of the attic insulation in a private house with their own hands concerns the work in the corners under the roof.
6. There we will lay a layer of insulation so that it fits snugly, but not squeezed. Its height will be equal to the height of the second layer of the flooring. Then we begin to lay the second layer adjacent to the beams of the roof.
7. Next is the insulation of the ceiling in the attic in a private house. First, we additionally increase the frame, so that the width of the flights is equal to the width of our insulation, and it densely lay between the beams, but was not compressed.
8. After the insulation is installed, it's time to fix the vapor barrier film.
9. The last stage of warming the attic in a private house is the plastering of the whole with plasterboard. Now your house will become noticeably warmer, as heat losses will be minimal from the attic side.