What is girosculator and how to choose it correctly?

What is girosculator - a convenient electric vehicle, outwardly looks like a bar with wheels on the sides, works on an electric motor, sensors for balancing are built in. The progenitor of the novelty is called the sigve, where there are also two wheels and a platform for the legs, without a steering column. Learning to ride a gyroscope is easy.

Why do you need gyroscope?

Many people shrug their shoulders: why do you need a gyro in your home, if there is another transport? Indisputable plus - compactness and speed. The device accelerates to 15-20 kilometers per hour, until the stop can be reached in a matter of minutes. Briefly about the pros:

1. Saves time to reach your destination.
2. Ignoring traffic jams.
3. Does not require parking.
4. You do not have to pay for it in transport, it fits easily in a bag.

Gyroxcument is great for recreation:

1. Convenient to use, does not require physical effort to activate.
2. Ideal for sightseeing, speed is easily adjustable.
3. You can ride in the park, use for walking with a dog.

What does a gyroscope look like?

Externally similar to a skateboard, only with two wheels built into the platform. Main parts of the device:

• a body with rubberized inserts that keep them from slipping;
• electric motors in wheels;
• wheels consist of tires and disks with an engine;

Single-wheeled gyro-footer differs in that:

• has a camera wheel system, so it rides gently;
• there is a system for increasing power;
• wheels - in the plastic case;
• on the body there is a handle with a control panel;
• on both sides of the device there are special footsteps;
• there is no front and back part, so it's easy to go both forward and backward.

How is the gyroscope constructed?

The most important thing in this device is a balancing system with gyroscopes and gyroscopic sensors. Some models are equipped with a backlight to navigate at night. New models have an application that captures the speed and charge of the battery. The main gyroscope device includes:

• microcontroller of the balancing system;
• auxiliary boards, gyroscopes are placed on them;
• platform with control areas in the form of buttons;
• steel fastener, which is responsible for the load;
• boards on both sides of the platform for independent engines;
• Two gyroscopic sensors transmitting information via a loop to the processor;
• processor, implementing software, through which a command is given to electric motors, where to turn the wheels;
• accumulators for electric motors;

Types of gyro pacemakers

What are gyro pacemakers? They are divided by the type of wheels, the size of which determines the possibilities of the device:

1. Children's wheel, 4.5 inches, designed for light weight.
2. Welterweight, 6.5-inch wheels, high speed, small size. Withstands the load to 100 kilograms.
3. The average diameter of the wheels is 8 inches, high-speed, with good cross-country ability.
4. The big ones. The size of the wheels is about 10 inches, the most powerful electric motors.

Which gyroscope is better to choose?

How to choose the right gyro for the main parameters? Experts advise to focus on the age of the buyer and his needs:

1. For children, an excellent option - "Umka", the speed is small - up to 8 kilometers per hour, weighs a little, take up a little space.
2. Children 7-10 years are best suited gyroskouter on 6.5 inches. Light weight and good speed. Minus - badly drives on uneven roads, because it quickly wears out.
3. To teenagers under 18 years old, it is most convenient to ride on 8-inch. Copes with any road, steady and high-speed.
4. For adults, the best choice is a 10-inch gyroscope, large wheels provide patency in all weathers, speeds up to 25 kilometers per hour.
5. Elderly people are suitable devices with handles, with their help giroskuter easy to manage.

Mono-wheel or gyro-wiper - what to choose?

These devices are presented on the market in two variants: mono-wheels and gyroskutery. Each device has its pros and cons. Gyroscope on two wheels - more stable, but on one wheel - much more mobile. In the comparative characteristic, the picture is as follows:

1. The mono-wheel goes faster, it is convenient to carry in hands. Large giroskutery require adaptations.
2. Single-wheeled devices are designed for distances of 18 kilometers, can accelerate to 35 kilometers per hour, gyro-paceters have the fastest speed of 25 kilometers.
3. Easily pass into the openings, it can ride in supermarkets, gyroskouter this ability can not boast.
4. With a sharp impact on the road monocycle do not have time to restructure, unlike the gyroxcuaters.

What is a gyroscope with one wheel, what is different in type? There are mono-wheels for children, for 5 inches, accelerate to 10 kilometers per hour, on an uneven road turn off. Teenagers, by 12 inches, can gain speed up to 13 kilometers, and adults - with a diameter of 15 and an engine power of 500 watts easily overpowered to 20 kilometers per hour. If a child has problems with a sense of balance, it is better to purchase a less-speed model for him.

How do I charge a gyro controller?

When charging this vehicle completely "sit down", the device will lock the wheels, and during driving it is very dangerous. If the charge is small, the device will be worse "obey". Even if the gyroscope is idle, it should be recharged at least once a fortnight. How much is charged girosculator - a half to two hours, depending on how to use it. On equal roads charging is enough for two or three hours, as much - in the frost to -5 degrees. How do I charge gyro pacemaker? Short instruction:

1. Check that the device and connector are dry.
2. Plug the power supply into an outlet, then connect it to the gyro.
3. Insert the plug into the correct connector.
4. Set the time marked in the instruction. For different species it differs, but not more than 4.5 hours.
5. When the device is ready for use, a green light will appear on the indicator. Turn off the plug, then the power supply.

Accessories for gyroscope

Accessories for this device are divided into external and internal. It is best to immediately acquire a device with external devices:

1. Carrying bag or carrying. Different giroskutery suggest different models of bags, based on the size of the wheels.
2. Remote Control.
3. The body of a gyroscope.

Internal accessories do not have to be purchased in advance, they have to be bought in case repair is needed:

1. The battery is the main part of the mechanism.
2. Support frame.
3. Inflatable wheels, they need to be changed only on the device by 10 inches.
4. Sensor balancing system, you can buy both in parts and in a set.

Hovercart for gyroscope

The developers have recently appeared an original novelty, convenient for family trips - a stroller for gyroscope. It is attached to the body, there is a place where to sit, for stability there is a front wheel. Front legs are provided. Is going very quickly, takes up a little space, so this novelty is readily purchased for children. A good choice for older people, who are more comfortable moving around while sitting.

Bag for gyroscope

About what a vehicle, like a gyroscope, requires its carrying, immediately not all think. But over time they still buy a bag to protect the device from damage. What should be the gyroscope bag? Some valuable tips:

1. To buy a bag is better from a rigid fabric.
2. Choose a product with pockets for the charger and power supply.
3. To study the quality. Seams should be even, without protruding threads.
4. Check if there is a soft insert on the bottom that protects against damage.

Bags for large giroskutery 10 inches are very voluminous and inconvenient, experts advise to choose a backpack, in the crowd, it will not be beat on the legs. It is best to buy a carry-over from a fabric that repels water, which will protect it in a downpour. If you plan to use the device in the winter, you should buy a bag made of dense fabric, it will save the gyro during the wet snow and severe frost.

Protection for gyroscope

What is gyroskutter for those who are accustomed to using it daily, it is not necessary to explain, therefore, like any irreplaceable helper, it requires quality care. A fine rain will not damage the device, like a deep puddle, but only if it is reliably protected. For this purpose the water protection of the gyroscope is provided:

1. Tape of tubes, it is glued to the joints of body parts with a special tape.
2. Case for the case, protects from shock and dampens vibration. It is better to choose a silicone.
3. Aqua, it can be applied in firms that specialize in waterproofing hydro-boards. You can do this yourself, by processing the composition of all electronic devices and mechanical components.