Fence in the country with their own hands

Having built a dacha, you have to take up the ennobling of the house territory. One of the following steps can be to install a fence . With this question you can turn to specialists, and you can do this work yourself. After all, in order to install a simple fence in the country, you do not need to be a certified specialist yourself. However, such qualities as desire, and perseverance are essential. In this article, we will step by step explain how to put the fence in the dacha with our own hands.

How to put a fence in the dacha with their own hands?

Doing work on your own, you can not restrain the flight of your imagination and come up with a lot of ideas for the original and decorative fence to the dacha with your own hands. In this case, the time to work can go more than the installation of a simple fence. If you are a novice in such a business - we recommend starting with the installation of a simple fence in the dacha with your own hands.

Our fence will consist of wooden slats and posts.

1. First, we 'll set up the bars . To do this, using a thin rope and two fixed guides, determine the height of the columns, taking into account their immersion in the ground. Then dig a hole. The depth of the pit depends directly on the height of the fence. If the height is 1 m or more, bury the columns to a depth of at least 70 cm. We load a pole into the pit and fill it with concrete for 10-15 cm. After that, we fall asleep in the pit with crushed stone and rammer it.
2. With the help of the level, we check how straight the pillar of our simple fence for a summer house is, set by our own hands.
3. If the post is exactly, we fall asleep with more rubble, we ram and dig in. Posts should be set in increments of 2.5 to 3 m.
4. With the help of galvanized corners and screws, we attach wooden guides to the poles.
5. After this, you can proceed to fasten the front fence boards. Preliminary it is necessary to cut them. To simplify the work, you can purchase material of one long strip of 3 m and cut them in half. Thus, the height of our fence will be 1.5 m.
6. Before you start fixing your own hands with facial boards of a simple fence for a dacha, you need to mark the guides, using a tape measure and a pencil or a felt-tip pen. Marking step 10 cm. We fasten the boards with a screwdriver. First on the top guide, then on the bottom. Before fixing on the bottom with the help of a level, we expose the straightness of the board.
7. We fix the board at the board, periodically measuring the height of the anchorage and our simple fence for the dacha is ready with our own hands. After installation, the fence should be covered with paint, varnish or some other coating that will protect it from moisture, fungus and parasites.