Wall-papers - an ideal way to make changes to the already bored interior of the room, not undertaking a large-scale repair. The main guarantors of the excellent final result are the correct choice of the image itself and its high-quality application to the wall. Most people try to cope with this task on their own, saving on the services of masters. But is it so easy to paste wallpaper with your own hands? We propose to find out by reading this article.
Procurement of necessary materials
Before gluing paper wall-papers , it is necessary to be reserved by the certain list of adaptations. They will help to do the job neatly and quickly. So, we get the following names:
- level or ruler;
- knife for cutting paper;
- a wallpaper roller made of rubber;
- wide and narrow brush;
- stairs;
- clean and dry rags.
Using which glue is accompanied by the gluing of wallpaper?
Due to the fact that the current wallpaper can be produced from a wide variety of materials, it becomes necessary to purchase the appropriate adhesive. However, there is one rule that must be observed in any case: the thicker the source material, the thicker the glue should be.
Simple and fast docking of individual elements of the drawing will ensure the application of the adhesive on both the wall and the canvas itself. The mixture must be prepared in accordance with the manufacturer's instructions.
Usually during the purchase, a set of photo wallpapers is accompanied by a special guide to their gluing, compliance with the rules which will greatly facilitate the process. Also, do not neglect the advice of sellers and masters.
Preparing the surface before gluing wallpaper on the wall
The walls must have a perfectly smooth surface, no defects and remains of the old coating are allowed. Be sure to remove dust and dirt, you can even work with a vacuum cleaner.
Do not try to paste wallpaper on the existing finishing material, even if it is firmly hanging on the wall. It is likely that the old pattern may appear.
If the plot of new photo wallpapers is made in light colors, then for clarity of the picture the wall should be painted with white water-emulsion paint, and after it dries, cover the surface with a primer coat . This will prevent distortion of the pattern.
A step-by-step instruction on how to correctly apply wallpaper
- To achieve seamless images can be by cutting the white stripes along the edges of the sheets. It needs to be done with a sharp clerical knife, but not with scissors. They can leave irregularities in the cuts.
- On the wall it is necessary to put labels that help to properly fix the elements.
- On the floor you need to lay a sheet of paper or newspapers, on which the wall-papers are then unfolded.
- First you need to apply an adhesive to the wall, after which the elements of the picture are also lubricated. They will then need to be folded inward for better impregnation with glue. Do not leave the material to impregnate for more than 10 minutes, as it can spread.
- The first painting must be glued to the surface strictly according to the marks drawn in advance.
- The rubber rollers need to drive out air and excess glue from under the wallpaper.
- In the same way we glue the other parts, not forgetting to join the pattern.
- The next stage will be applying a protective coating on the pasted surface, protecting the pattern from the sun, moisture and other negative factors.
- Protect the room from drafts to complete drying of the wallpaper.
All of the above is the most accessible information regarding how to glue wallpapers with your own hands. It may seem that their self-adhesive version is much easier to install. But this is far from the case, because it requires skill, experience and speed of gluing.