A warm balcony is not just a whim or a desire to get a couple more warm square meters. Often it is he who literally pulls all the heat out of the house, and simply to be in a cozy room is much nicer than in cold walls. Anyway, and the question of how to insulate the balcony from within with their own hands remains relevant for today.
How to insulate the walls of the balcony from the inside?
- In the first part, we touch on the point, how to properly insulate the walls of the balcony from the inside with your own hands. We will use foam plates. To fix them we will build a frame made of galvanized profile. We select the width according to the thickness of the sheets.
- We do not fasten the lower guides to the floor, as this will allow us to make better sheets, in order to insulate the balcony from the inside.
- It is the lower guides that help to make the sheets, like the doors of a compartment. After installing the heater in its place, we begin to fix the profile.
- If we decided to properly insulate the balcony from the inside, we will have to try and fix the sheets properly. Then in the future there will be no heat loss.
- How much we would not try, and between the balconies and the walls there are always gaps. Even when there are very few of them, cold air literally walks between the inner and outer spaces. Work all, even the smallest, cracks with foam, an obligatory part of the insulation.
- Sew the sheets of drywall layer of insulation . For the installation we use a ready-made structure from the profile.
- Then there is only the final decorative finish.
How to properly insulate the floor of the balcony from the inside with your own hands?
- To qualitatively insulate the balcony from the inside with your own hands, you need to properly close all the gutter holes. Then lay the foam polyethylene substrate.
- On it we install the edges of the carcass for the laying of the heater. Ribs are made of a wooden beam. After installation, it must be pressed in addition with a mounting foam.
- The next stage is laying of mineral wool or other chosen insulation.
- After that, we close the layer of mineral wool with a foil substrate. She will not let the heat go, will keep it indoors.
- As the main floor, we lay plywood on top of the substrate. This is the so-called rough floor.
- In the end, we will use laminate. That's why it's important to properly insulate the balcony from the inside, since without a good substrate, the laminate will start to "walk" and remain cold.
- Another layer of substrate directly under the laminate flooring - and our floor is ready.
