Blinds , protecting our room from overheating by sunlight, sooner or later become dirty, and they have to be removed to wash. In any case, all the done movements with the removal of the blinds must be remembered, so that later you will not get confused with the assembly.
How to remove fabric vertical blinds to wash?
The arrangement of vertical blinds is quite simple, so removing them will not be difficult. The design includes such details: cornice, slats with control cords and connecting chain, weights, runners and chain.
First we need to open the blinds using the control system and collect them together. Then carefully remove the chain from the weights, and pull the weights from the slats. Having disassembled the bottom, we proceed to remove the slats from the eaves.
To do this, with one hand, withdraw the elongated part of the runner clip to the side, and with the other hand, lift the lamellae with the shoulder up and to the side. Having freed the shoulders, lower it, taking off the lamellae. Tissue lamellas need to be rolled up.
Slats of aluminum and plastic structures can not be folded.
If there is a need to remove the blinds with the cornice, hold it, press the latch of the latch. On plastic windows, for example, are mounted circuit brackets. They are removed by turning the clamping wrench counter-clockwise, which secures the latches.
How to remove horizontal blinds?
The horizontal blinds are fixed by brackets, from which firstly the cornices are detached and the decorative cover is removed. We find the upper edge with the protrusions of the locks and raise the lamellae. First to yourself, and then to the right pull the latches. And then we pull our curtains down to ourselves and down. If we did everything correctly, the blinds are removed from the window.
With the brackets, the blinds will be removed in the event that we begin to unscrew the screws that fix the metal corners, which hold the brackets. This operation is done first below, and then at the top of the window.
How to remove roll blinds?
For roller shutters, dry cleaning is more suitable, since when washing is broken, the coating repels dirt. But, if washing is not avoided, they are removed by bending the screw with a screwdriver, which is located on the bracket. Then, with one motion to yourself or down, remove the shaft from the bracket.