Today, not every apartment can meet such a device. And some in general will have to hear about such a miracle of technology for the first time. But in Europe, a thermostatic mixer has long become familiar and is widely used. We offer to consider the advantages of this type of mixer, to understand the principle of its operation.
What is a mixer with a thermostat?
There are several different models, depending on the destination:
- shower mixer with thermostat;
- bathroom thermostat mixer ;
- Mixers for kitchen (sinks) with thermostat;
- special models for bidets .
The general principle of operation for all models is similar, but their purpose is completely different. Models directly for the sink you can install only above the washbasin. This option is suitable for the kitchen or washbasin in the bathroom. The shower mixer with the thermostat has a slightly different design and is adapted for the supply of water in the shower. This applies to all other models: the functionality is only fully disclosed when the design is used correctly.
Mixer with thermostat: operating principle
This is a new generation of sanitary ware, which includes a temperature sensor. You can adjust the temperature you need and do not turn the valves at random. For adjustment, there is a special panel directly on the mixer. You simply set the necessary temperature from the very beginning and the tap automatically supplies hot or warm water.
It is very convenient if the house has small children. You do not have to constantly worry that too hot water will run out of the tap and scald your hands. Also there is no need for a thermometer. There is a special bathroom faucet with a thermostat with a lock function so that children can not change the settings and thereby harm themselves.
Now let's take a closer look at how the thermostat mixer works. The work is based on the functioning of the thermoelement, it is it that regulates the water supply and the mixing process. If, for any reason, the supply of cold or hot water stops, the thermocouple stops the water supply from the tap.
First, you put a suitable temperature on a basin mixer with a thermostat. Then you need to adjust and force the head. You can control the whole process manually or with the help of the remote control, it depends on the mixer model.
Mixer connection with thermostat
Installing a mixer with a thermostat does not require too much effort from you. The fact is that the design differs only in the presence of a thermocouple, in other respects the parameters of the installation have practically not changed. It is enough simply to remove the old mixer and install a new one in its place. If you decide to change life for the better and install a mixer with a thermostat, pay attention to
- Look for models that are manufactured and adapted specifically for the domestic water supply system.
- It is very important to consider the location of the main cold and hot water. The mixer is designed for hot flow from the left side and cold on the right. Otherwise, the sensor may not work at all.
- Often in the main there is a difference in the pipes, which leads to hot water entering the tube with a cold one. Look for models with check valves. The valve will not allow mixing with water, and if the supply of cold or hot water is cut off, it will automatically block the flow.
- You should also remember about the quality of water. Install filters in advance, this will significantly extend the operating time of the mixer and save money. The additional installation of a hygienic shower is fully justified if you are expecting an addition in the family or simply like comfort.