Needle from the jar with your own hands

The original and unusual needle bed made by own hands always raises the mood before the beginning of work. Yes, and needles, it is best to store collected in one place, and not stuck into the reel with threads. Therefore, we advise all housewives to try to make such a thing. We, in turn, will tell you and give you advice on how to make a needle bed from a can with your own hands.

Needle jar

Option number 1.

Materials:

• a well-washed and dried tin can, from canned food or carbonated beverages;
• bright trimming fabric;
• cotton wool, or foam rubber, for filling the needle bed from the tin can;
• sharp knife;
• dense cardboard;
• hot glue;
• beautiful button,
• thread;
• needles;
• braid.

Let's get to work.

1. Cut off the bottom of the can. You can choose any height, but keep in mind that it is too high or vice versa - they will be inconvenient to use. Be careful, the cans are very sharp.
2. On the cardboard, draw a circle that is slightly smaller than a diameter can. The resulting round should freely enter and exit the jar. In the center of the roundworm, make two holes so that it looks like a large cardboard button.
3. Now it is necessary to cut out a piece of cloth from the tissue so that they can wrap a cardboard kruglyash. Mark the center with chalk.
4. Glue the cloth to the cardboard, making four sticky points. The distance between the cloth and the roundwood is filled with prepared materials.
5. When the cushion becomes pot-bellied, glue any remaining openings.
6. Now we sew the button to the previously planned middle.
7. On the glue we put the resulting cushion in the jar.
8. Almost everything, it remains only to decorate, almost ready to needle bed and other nice things.

Option number 2.

This option is very similar to the previous one, but it has its own nuances.

Materials:

• bank;
• the cloth;
• braid;
• material for packing;
• button;
• thread;
• hot glue;
• groats.

Let's get to work.

1. From the fabric we collect a soft lump, fill it with filler and tighten it with a thread.
2. We sew the middle with a thread and decorate it with a button.
3. From the outside we glue the jar with a cloth.
4. Inside we pour the rump.
5. The edge of the can from the inside is coated with glue and we put the prepared "cushion".
6. Almost everything, it remains only to decorate the jar with a braid.

It's so easy and simple, you can make pretty beds with your own hands from ordinary cans.

Also you can make a beautiful box for needlework with your own hands.