Plaster under the fur coat is a labor-intensive process of finishing, which consists in spraying a cement-sand mortar onto the work surface. Material costs and labor resources are minimal.
Methods of applying plaster walls for a fur coat
There are many ways to apply the mixture to the wall: from the use of improvised means to the use of special installations. The work of almost "jeweler" accuracy can be obtained using a special machine. Due to the compressor, the solution is sprayed, and the socket must be kept straight.
The most common tool for such a finish is a regular broom and a stick. After you have soaked the broom in the solution, hit the stick that is near the wall. Alternatively, use a conventional brush and a plaque. The brush will need to be carried on the board in the direction of "on itself". Alternatively, use a metal mesh mounted on a wooden frame. "Through" it rushes the solution, at the end of the work the grid is dismantled.
Features of plaster walls
Before finishing it is recommended to plaster the working area (with or without beacons), then proceed to the decorative finish. For work, an ordinary cement-sand mortar is suitable. It is recommended to use sand with cement of mark 400 in the ratio 3: 1. Take into account, the less dense the composition, the smaller the fraction will be.
Facade plaster "coat" is extremely simple in the application, you can decorate the surface in this way yourself. Pre-treat the desired area with a primer to ensure adhesion. The coating should consist of 2-3 layers. The solution should be distributed evenly to avoid sagging and staining. The first layer is applied, apply the next one almost immediately, so that the substrate does not have time to dry out. In order to give a certain shade, certain additives are used. It is allowed to use enamel paint with putty (1: 1).
| | | |
| | | |
| | | |
