Insulation for walls inside the house

It happens that the apartment is located inconveniently, and to protect from the cold housing outside hinders the elevator shaft, a very expensive facade or house is a historical value. Therefore, you have to look at the options, which heaters are better for walls inside the room, so that at least a little to save yourself in the winter from the cold. We suggest that you review the list of materials that are used for this particular type of work.

Types of insulation for walls inside

  1. Drywall . Directly to the wall, drywall is usually not nailed, to arrange the insulation will have to install the owners of the crate. But you get an almost perfect geometry of the walls and the ability to glue the wallpaper on a high-quality flat surface. Alas, it does not possess a large load-bearing capacity, for the fastening of shelves it is necessary to pre-assemble special slats or use an anchor fastening through sheets of plasterboard. It is recommended to fill the inner part of the frame with additional thermal insulation materials, which we will describe below.
  2. Polyfoam . This is a very popular and inexpensive insulation, light and completely durable. Unfortunately, rodents are very fond of him, which sometimes creates major problems. Some experts inside the house do not recommend using it because of the allegations that the foam is harmful and can release toxins during decomposition.
  3. Cork insulation . Cork sheets are attached to the glue, so the owners will have to level the walls well. You will get some heat insulation and protection from extraneous noise, but do not expect an ideal result, the cork layer is too thin for effective protection against strong colds.
  4. Mineral wool . (Photo 4) This kind of insulation is harmless, has good properties, but it is fixed only inside the frame. You can not glue wallpaper or nail supporting structures to minivate, it is better to hide it behind plasterboard or decorative panels.
  5. Styrofoam . This insulation for walls inside the apartment is superior in quality to polystyrene, it is rather thin, but does not absorb water. In addition, the sheets are perfectly joined at the expense of the groove, so with the help of mounting foam and expanded polystyrene, you can get a good seal of the rooms.
  6. Decorative insulation for walls inside the house. Even vinyl wallpaper helps to warm the room a little, but there are special wallpapers made of polystyrene or substrates that make it more effective. A huge effect of them do not wait, but as an economical option this method is suitable.

When wireframe insulation is lost part of the living space, labor-consuming and expensive, but protection from colds is the best. Therefore, as always, a good result without investment will not be obtained. But the rest of the materials are able to remove the problem from the cold a little, if you do not have more opportunities and finance for more.