Plumbing is the part of our everyday life that we meet every day. In the normal state, the toilet should not have any abnormalities. But if you notice that leaking water from the tank into the toilet , rather take action. The fact is that such a leak not only leads to irritation, but also to a significant increase in water bills.
A toilet bowl flows - wear of a rubber pear
In the drain pan there is a rubber pear which does not allow water to enter the toilet prematurely. It is it that rises when you press the tank button. Naturally, as you use, the elastic properties of this accessory are lost. As a result, the hole is not completely blocked by it, and a leak occurs.
In this case, you can solve the problem by replacing the pear with a new one. Unscrew it from the stem and pick up in the store the same, but only soft.
Skips the toilet bowl - overflow
Sometimes a malfunction in the normal operation of the tank is associated with overflow of excess water. Basically, this happens because of the wear of the rubber gasket of the valve. If this is so, then you have to spend it, because it is not sold separately. To do this, in the sanitary ware shop, you must select the appropriate fittings and change the culprit of the leakage.
Other repair options are less expensive. For example, the leakage of the toilet bowl may stop after lifting the float. If that's what happened, just bend the float lever.
It happens that in the mechanism of the tank frayed or rusted hairpin. This fastener serves to fix the float arm. If it turns out that the hairpin has deteriorated, you can replace it with a cut of a copper wire of considerable thickness or a new one, by purchasing a suitable wire in the store. Another thing is if the toilet bowl is leaking because of a crack on the valve. Check is simple - usually in this case the hairpin
The water flows in the tank - the bolt has burst
Another reason for the leakage is the wear of the bolt, which secures the tank and shelf. Under the constant action of water, the plastic bolt can burst, and from the metal - corny roast.
If we talk about how to fix the toilet bowl in this case, then, regrettably, you will have to change the whole armature. And we recommend not to stand on the rake twice and choose in the store a set with brass bolts. They are not afraid of cold water and will serve you long. In addition, and are inexpensive.