Floor shelves for flowers by own hands

You do not need to buy flowers for the flowers . If you have any original ideas about the shelf , they are easy to implement with your own hands, using available materials available. Arming with a jigsaw, drill, pencil, tape measure and get to work. However, additional materials will be needed: waste sheets of chipboard, flexible PVC edge, lining on the legs, screws and metal corners. Their cost is small, be sure that the floor shelf will not cost you a round sum.

How to make a shelf for flowers?

1. Cut the main blanks better with a jig saw. Shelves can be hand-made from various materials. We believe that it is easier to work with particleboard. Natural wood is harder to process and you do not need to buy impregnation, varnish or paint in the final stage. The laminated surface looks excellent, and the ends are easy to close with an edge.
2. The jigsaw will be the most convenient tool when you need to cut a curved profile.
3. The ends of the parts made of laminated chipboard are covered with a flexible edge.
4. Its edges are better fixed with glue, and in some particularly difficult places with small carnations.
5. In the place of the groove we had to hammer two nails at once, so that the edges of the edge did not move away from the chipboard.
6. Round platforms for pots are ready.
7. Our floor shelf for flowers, made by own hands, has beautiful legs of a curved shape. It is better to pre-fabricate the template and only then cut them out of the chipboard. The grooves must be placed symmetrically on each workpiece.
8. When the adjustment of all the elements is completed, you can proceed with the assembly. We connect the parts with self-tapping screws, using reliable metal corners.
9. Begin the legs to attach to a smaller circle.
10. Here it is necessary to use many self-tapping screws, so use a drill or a screwdriver.
11. We spread the groove with the glue, insert the legs and screw it.
12. In the same way, we attach a large round platform.
13. The ring at us carries out some functions. It is a limiter, so as not to drop the pot, increase the rigidity of the product and is a good decorative element.
14. The ring is fastened in the same way as the previous parts from the chipboard.
15. On the legs it is desirable to attach the plastic covers.
16. You see that the floor ledges for flowers by their own hands are not so difficult. Our is already ready. You can check the strength of the product by installing the pot with the plant in place.