Minitractor from motoblock is ideal for processing small plots of land. Such an aggregate will allow you with much greater comfort to produce those actions that you normally perform with the help of a motoblock: plowing of land , harvesting, transportation of various cargoes. But not everyone can buy a ready-made factory model, which is explained by its high cost. Therefore, many are converting the motoblock into a mini tractor with their own hands.
Homemade minitractor with a motor from a motor block
In order to successfully carry out the alteration, it is necessary to choose the right motoblock, which must have certain characteristics, namely:
- power - the larger the areas you plan to handle, the more power a motor-block must have;
- type of fuel - it is preferable that the unit operates on diesel fuel, as this will allow for more work. In addition, diesel engines use fuel much more economically than gasoline ones;
- weight - a motor-block with a smaller mass, more controllable. However, a massive aggregate will be much better at handling hard soil;
- cost - it is recommended to give preference to more affordable for domestic models.
Set for converting the motor block into a minitractor
In addition to the motor block, you can purchase a ready-made universal kit for its conversion into a mini-tractor with your own hands.
It can include various components and components, namely:
- steering wheel;
- brake cylinder;
- frame;
- control levers;
- seat;
- rear or front lifting mechanism;
- hydraulics for the tractor;
- set for the installation of active rototillers;
- assembled adapter with hub and brakes.
Such a set will help you cope with the conversion of the power unit into a mini tractor.
Instructions for assembling a mini-tractor based on a motor block
In order to make a mini-tractor on the basis of a motor-block with your own hands, it is recommended to follow the following instructions:
- Before the beginning of the work prepare the necessary parts (or a ready-made universal kit) and a tool. You may need an electric drill, a welding machine, bolts, nuts, wrenches and a screwdriver, a Bulgarian, discs for cutting metal.
- It is recommended that you first draw a drawing of the future mini-tractor.
- Using a pipe or metal corners, a supporting structure is added. This needs to be done to allow the installation of an additional pair of wheels. Billets for the frame are cut by a Bulgarian and fastened together by electric welding or bolts. At this stage, you can immediately mount the attachment, which will allow the use of additional equipment.
- A piece of metal pipe is attached to the front axle, to which, in turn, a wheel pair is attached.
- Install the engine on the front of the frame. On the site of its installation make the fastening system.
- After the basic design has been assembled, the brake system is installed, as well as the hydraulic distributor for work with the attachments.
- Run the break-in, after which you can start working.
This algorithm of action can be approached by re-equipment of the motor blocks of such models: "Neva", "Centaur", "Agro", "Zubr". As a result, you will get a compact minitractor.
Minitractor from the motor block will help you effectively solve many tasks in the process of agricultural work.