You can make yourself a visor for the porch using a variety of materials. Inexpensive, lightweight and durable cellular polycarbonate is the best solution.
Let's consider more in detail how to make a visor made of polycarbonate
- Define the design of our future design. Canopies over the porch of polycarbonate can be single-sloped, in the form of a dome, in the form of arches , gable, hipped roofs, etc.
- We will prepare the materials and tools necessary for making the visor from polycarbonate by our own hands: a steel pipe with a diameter of about 2.5 cm, sheets of polycarbonate up to 8 mm thick, thermowells, connecting profiles, tape measure, level, jig saw, welding machine, Bulgarian, drill, screwdriver.
- We will make a skeleton. We cut off a pipe of the necessary size, we make cuts and bend it, the places of the cuts are welded, the resulting blanks are welded together.
- Mounting the polycarbonate to the frame
We proceed to the main stage in the manufacture of the visor for the porch of polycarbonate - this is fixing the sheets to the finished frame.
- Fix the polycarbonate sheet firmly to avoid vibration. We saw the sheets.
- When attaching, leave a small distance between the sheets - 3-4 mm. We close these blanks with special connecting profiles.
- The sheets are fixed with thermo-washers, which also leave a gap when fastening, we fasten them with an interval of 30-40 cm.
- The edges of polycarbonate sheets are sealed with a special tape, which will prevent dirt from entering and prevent the appearance of dampness .
- We install sheets only in a protective film to exclude the possibility of accidental damage, we remove it only after the completion of all work.
- The resulting design is ready for installation on the wall.
The manufacture of small canopies and poles from polycarbonate can be done in a few hours. These buildings can not only protect against sun and weather, but also serve as a decoration of your yard.