For sure, at all such concept, as a warm floor , associates with comfort and house cosiness . On how well this part of the house is protected from the penetration of cold and moisture, not only does the atmosphere of the house depend, but sometimes the health of the household. This is especially important for a country house, because the likelihood that the basement will draw a cool, the biggest. Therefore, experts in the field of construction have invented a lot of different technologies for floor insulation in a private house, which, in principle, is beyond the power of many.
Typically, for insulation of the floor in a private house, materials such as polystyrene, expanded clay, mineral plates or glass wool are used. In our article, we will show you in detail the scheme of floor insulation in a private house with the help of heat-insulating slabs made on the basis of rock shavings. They provide the room with good heat and sound insulation, do not give in to burning and do not absorb moisture, while keeping the heat inside the room securely, which helps to save considerably on heating the building. In our master class you will learn more about the way to insulate the floor in a private house. For this we need:
- heat-insulating plates 10 cm thick;
- heat-insulating plates 5 cm thick;
- wind and waterproof membrane;
- vapor barrier membrane;
- wooden logs;
- sheets of plywood;
- self-tapping screws;
- screwdriver;
- a stapler;
- construction knife;
- roulette.
We make the insulation of the floor in a private house
- On the prepared flat floor, we forgive the layer of wind and waterproof membrane.
- Next, we lay the wooden logs at a distance of 59 cm from each other, so that the slab width of 60 cm is densely packed into the frame.
- Between the lags we place plates 10 cm thick.
- Now, on top of the lower layer, lay an additional layer of slabs, 5 cm thick. Remove the excess pieces with a knife. The presence of several layers of material to insulate the floor in a private house will deserve more reliable protection from the cold.
- We lay on top of our "pie" a vapor barrier with a 10 cm overlap. This method of floor insulation in a private house will protect the plates from the penetration of fumes from a warm room into a cool cellar or a cellar.
- We fix the membrane to the logs with a stapler.
- Above all the insulation on the wooden logs we put the sheets of plywood. We fix them with screws.
- At this stage, the floor insulation in the private house is over, and you can start laying the floor covering.
| | |
| | |
| | | |
| | |
| | |
