Perhaps, each house has at least a small bundle of scotch. From time to time we use it as an alternative to glue, we pack gifts . If these are episodic moments, just finding the edge of the tape is not so difficult. If you have to use a sticky tape all the time by the nature of employment, it makes sense to think about buying a dispenser for Scotch tape.
Why do I need a dispenser for Scotch tape and how does it happen?
The construction of this convenient device will depend on the frequency and method of its use. If we are talking about a dispenser for a packing tape, then this can be either a model in the form of a pistol or in the form of a stationary structure. As a rule, the Scotch tape is loaded with a narrow tape, and the desktop dispenser for Scotch tape is wider. But this does not mean that there are no special fixed models for thin tape.
Usually desktop models are used by gift wrappers , in warehouses it is more convenient to work with a manual model. There is also a dispenser for double-sided scotch tape. You can safely charge any two-sided adhesive tape both on fabric, and on paper or polypropylene basis.
The body itself is made of both plastic and metal. Both models will be equipped with a plastic handle, but metal pistols are considered to be more reliable and durable. Before using the dispenser for Scotch tape, let's take a look inside and get acquainted with its components:
- A special regulator that monitors the tension of the tape;
- for pressing the tape to the surface there is a special rubber roller;
- after application, the plastic plate, as it were, smooths the tape to the surface;
- A small knife so that the measured length is cut automatically.
How to use a scotch dispenser?
The very instruction of a Scotch dispenser is incredibly simple. First of all, we choose the right model: the width of the scotch and the dispenser itself must coincide. And then the device will do everything itself, as soon as you press it to the surface. You gently pull the tape along the fixation line and slightly cut it off as if by a slight pressure.
It is important to hold the gun correctly and press at an angle. So, how to fill the dispenser for Scotch tape step by step, is described below:
- We install a roll of tape into the coil of the gun.
- We uncoil just a little scotch.
- Next, you need to slightly push the presser plastic plate and guide the tape under the rubber pressure roller.
- Presser plate is kept pushed aside and begin to stretch the tape to the holder, then release the plate.
- You can start work.
The instruction is approximately the same for many models of Scotch dispenser. As a result, you get several trumps to work at once. First, you do not waste time on the same search for the edge of the tape and save a lot of time. You do not have to cut off excess pieces of tape to attach it to the edge of the table and
Let's not forget about the neat sections, the smooth line of fastening and the clean work as a whole. Models of such a device are different from the simplest desktop, to more complex manual. In the desktop, everything is primitive: you just place the reel in your place and manually unwind the piece. Then attach it to the cutting blade with teeth. In manual variants it is necessary to adapt a little, but the essence of the work remains the same. Either way, and with constant work with adhesive tape, the gun will save you time quite accurately.