Fence from the mesh-netting is one of the cheapest, durable and easy-to-implement fencing options for a holiday village or a private house. It is used both as a fence, going out on the street, and for dividing the territory between neighboring household plots.
Stretching fence of mesh-netting
Currently, there are two main types of construction of fences made of this material: a tension fence and a sectional version. Stretching fence from the mesh-netting is more suitable for giving or fencing private houses in the country, as its appearance is simple and uncomplicated. However, such a fence and an order of magnitude cheaper than the sectional option.
The principle of installation of a tension fence is the following: along the perimeter of the site, metal pillars are pinned to the ground, and after them a wire netting made of galvanized metal is fastened on them. Thus, the entire site is fenced. The frame is used only in the location of the gate, as well as the wicket, because they have an increased load during the operation of the fence. Modern technology also makes it possible to use a plastic mesh-netting instead of metal, which was the only option before. Plastic is the cheapest material, it is not afraid of the impact of natural conditions. However, the strength of such a fence is not as high as that of a galvanized metal version, therefore, experts recommend using a plastic mesh where it is less affected, for example, to divide the suburban area of the fence master and his neighbor.
A feature of the tension structure is also that, if desired, a metal rod, interwoven with grid cells, can be passed along its upper and lower edges, which later will be welded to the supports. This technique better fixes the mesh-netting in a certain position for it, and also excludes the possibility of the theft of this material.
Advantages of the tension variants of fences from the mesh-netting are their low cost, ease of installation and durability, and disadvantages are the large time costs for installing the fence in comparison with the sectional version, as well as the less attractive appearance.
Sectional fence of mesh-netting
The sectional version of the metal fence from the mesh-netting, as already understood from the name, consists of a number of separate sections. They are manufactured in special factories and consist of a metal frame, inside which stretch mesh-netting, and its ends are welded to the frame. Such individual components of the fence are brought to the site and are already assembled on the supports on it.
This option of fence is much more in demand among consumers. The correct fence from the mesh-netting of this design can retain its appearance for a long time. The grid will not sag, and the supports on the supports will not loosen.
The advantage of this option is the speed of installation. On the site, a sectional fence can be installed in 1-2 days, while a stretch will take much longer. Another plus of this type of fence is that the stack in it is located in small pieces, rather than an entire canvas, besides it is securely welded to the frame, which makes it difficult for intruders to steal. Finally, this design of the fence from the mesh-mesh looks more interesting and beautiful.
The main disadvantage of the sectional fencing from the mesh-netting can be considered its cost, as by this indicator it loses significantly to the tension fence (especially its plastic options).
| | | |
| | | |
| | | |
