How to sew trousers?

World standards of beauty dictate the reference parameters of the figure. Both men and women try to match them. Rapid weight loss results in the need to buy new clothes or to suture the old one. It is not difficult to sew a dress or a skirt, but to sew trousers is a more complicated task.

How to sew trousers?

Sewing pants is not as easy as at first glance. The main danger is the possibility of skewing the pants. The fact is that it is possible to sew trousers without complete re-cutting only by 2 sizes, not more. Significant transformations will require a complete redesign of the product, that is, in fact, to re-sew the pants. Self-cope with this task can only experienced seamstresses, so it is better to take the trousers to the tailoring in the atelier.

To sew trousers in hips or to sew up a belt of trousers it is possible and independently, adhering to following rules:

1. Sewed pants at the same time and from the outer seam, and on the step (internal) seam. Important! Seam on the outer seam is allowed only if it is necessary not to knit the trousers, but to remove excess tissue from a certain section of the thighs. Usually, in this case, the pants sit almost perfectly, and there is no need to sew the size itself. But also in this case, before you sew the trousers in the hips, you should try on them, staple "excess" fabric on the trousers, make a trial stitch by hand. And only after re-fitting you can spend a new stitch. If you cover your pants only from the outer seam, the trouser legs can be strongly skewed and it will be impossible to restore them to their original appearance.
2. If the pants are slightly narrow, you do not need to rush and suture the side seam. It is necessary to try on trousers, to stab the outer seam, to resemble them, to sit down. If the pants "pull", it may be that you need to sew an inner, stepped seam.
3. Before you sew the pants on the machine, you need to try them on and determine exactly where the trimming is required. At this point, trousers should be ripped off and swept at the required level. Then they try again, adjustments are made, and only after that the new seam is squandered.

How to sew trousers down?

There are: trousers flared. Wanted: straight trousers.

Stages:

1. Try on pants flared. Portnevskimi pins on both sides of one leg (and from the inner, and from the side of the outer seam) is removed the necessary amount of tissue.
2. Trousers are removed, they turn out. Soap marks the puncture site with needles, then the needles are removed and soap is drawn an even line, combining all the previously drawn marks.
3. Then both pants are neatly combined, with the help of tailor's needles the lines are transferred to the second pant leg (pierced both legs along the so-lined lines on the first leg). On the second trouser there are also markings of the arrangement of needles (pins), which then join in line.
4. Excess tissue is trimmed with a small distance for the seam. It remains only to stitch and sweep the seams.

Without a machine in most types of work can not do. You can only sew the trousers by hand.

How to sew the trousers by hand?

It is most convenient to use such a "rescue machine" for filing trousers, like filing trousers with adhesive tape. First, you need to iron the trousers according to the pre-planned line of bending. To do this, they need to be turned inside out so that the extra centimeters are on the wrong side. Then, in the resulting fold, an adhesive tape is put (it can be lumps) and pressed again with an iron. Adhesive tape securely holds the material together. For final fastening, it is desirable to manually sew the fold, since after washing the tape will be peeled off.