Who said that the greeting card for the holiday should be a classic kind? Why not try to do something new and surprise relatives and friends of an unusual postcard in the form of a box? Especially since it is not difficult to make such a box.
Scrapbooking card-box itself - a master class
Necessary tools and materials:
- colored cardboard, beer cardboard;
- scrapbooking paper;
- pictures for decoration, inscription, brads;
- Scissors, stationery knife, ruler, simple pencil, glue.
Performance:
- Let's draw a square of a larger size into 9 equal squares - this will be the bottom part of the box.
- Biguem (we push the places of folds) along all the lines. I used a special tool, but it can easily be replaced with a pen or a teaspoon. Make sure that all lines are level, otherwise the box will warp.
- Cut all unnecessary.
- The finished part pasted paper. Paper elements should be 0.5 cm smaller than the walls of the box.
- Decorate the paste on a substrate of colored cardboard (for density) and cut out.
- We paste decorations on beer cardboard and glue to 4 walls of a box.
- The inscription is also glued to the substrate and fixed at the bottom of the box with a small bend, so that under it you can place a bill twisted into a tube.
- The outer side of the box is also pasted with paper.
- For the lid we will outline the cardboard as shown in the photo.
- Cut all unnecessary, scour the lines and glue the cover.
- The cover is pasted with paper from all sides, except for the inside.
- The picture is also glued on the substrate, glued beer cardboard and fixed on the lid with the help of brads and in the end we glue the last paper square onto the inside of the lid. Postcard box in the technique of scrapbooking is ready!
- This box itself decomposes immediately after removing the lid, and gives a vivid impression to the recipient.
The author of the master class is Maria Nikishova.