Waving flowers are found everywhere - in gardens and living quarters. Supports for climbing plants provide them with proper growth and development, they make it possible to beautifully arrange a floral arrangement. They are used for landscaping of walls , decoration of homestead territory. With them, landscape design becomes more cozy and colorful.
Types of plant supports
Stands for flower shoots are special devices that are designed to hold them, create three-dimensional shapes. They help plants to show their decorative qualities in all its glory. Support for plants with curly branches is carried out by means of various designs. They differ in the quality of the material, in size, can take any form.
Vertical supports for climbing plants
Planting of the flower begins with the choice of the structure for its further weaving. Vertical supports are wall, ground and suspended. They are made in the form of grids, nets, guiding cords or laths. The wall outside the house can be planted with trees, if you add it with nice wooden or plastic lattices, trellises with large cells, through which ivy can easily curl. Wild grapes or hydrangeas have enough guiding cords on the wall, for which they will cling.
Especially picturesque look forged supports for climbing plants - screens, obelisks, cylinders with an openwork pattern. Thanks to the beautiful ornament they look decorative even in winter, if they are covered only with a wreath of bare branches. Such products are resistant to moisture and durable. Forged structures can be used as a fence or partition in the garden, in the gazebo.
Inclined plant supports
From the supports for flowers create original structures of different shapes. With the help of an inclined wooden grid or a metal grid with large cells it is easy to make shading at home, if you install a high canopy, one end of which will be in the ground some distance from the wall, and the second - at the roof level. Then, under the greenery of the foliage of wild grapes or ivy, it is easy to arrange a resting place.
Original garden supports for climbing plants are obtained if you make a long A-shaped structure from inclined planes, a pyramid or cone in the form of a high two-meter obelisk. They can be made from grids, nets, slats or buy a ready-made forged or wooden structure. They will be easy to crochet small vines, aconite, climbing roses .
Arch for climbing plants
As support for flowers, a pergola is widely used, which is a pole with a lattice instead of a roof. Often it is used together with an arched construction. On the roof and pillars of the structure can accommodate any greenery. An arch for weaving plants creates a holiday atmosphere on the site. It is widely used as a stand for roses, honeysuckle, grapes. The arch can be located above the wicket, use several pillars in a row and decorate a beautiful gallery for walks. A pleasant picturesque corner will be obtained if it is combined with a gazebo and benches.
Scaffold - support for plants
To support colors, there are many designs. Cuttings are the simplest supports for garden plants. They are distinguished by good functionality - they help to support heavy peduncles and fix the plant in the most convenient position. Cuttings are the most popular support for indoor plants, they are easily stuck in pots. Narrow and high constructions are suitable for weaving lianas. Short and wide will become a stable support for squat plants with dense foliage and lush peduncles.
Logs are found in different sizes and heights, can be placed in the ground near a single bush or installed on the entire height of the country house wall. In the second case, they are made massive, as independent supports, which can be leant to any plane. Often staircases are combined with terrestrial boxes for plants, representing with them a single design.
Round support for plants
Particular attention is worthy of support for the weaving plants, which has the form of circles on the legs. Its installation should be done in advance so that the peduncles and leaves can germinate inside the cylinder. The round shape of the support is convenient for spreading plants that have the shape of a bush, well supports the branches in a compact state, directs their growth upward. Braided with lianas, a round pillar forms a beautiful column.
Support for plants - lattice
The choice of the building must be approached responsibly - it must match the style of the house and the flower should be approached. Wooden gratings are made from spruce, pine, fir racks, which join together and form a pattern of large cells in the form of rhombuses or squares. They can be attached directly to the wall, often complementary to arches and arbors.
What plants need a support:
- A braided rose - she can not attach herself to the lattice, it must be tied;
- Hortensia - clings to the support with the help of roots;
- Curly creepers: anemones, lemongrass, hogweed, honeysuckle , hops - weave themselves;
- Wild grapes and sweet peas - cling to the bars with the help of antennae;
- Clematis and prince - are fastened with the help of leaves.
Support for plants - grid
A metal or plastic mesh for plant support is a convenient, lightweight and flexible support. It looks elegant, well-blown, simply attached to any design. A mesh fixed in a sturdy frame, or stretched between two poles, can be installed anywhere in the garden and used as a screen of weaving plants. Like a screen, it can zonate the territory, with its help it's easy to create cozy isolated green corners. The fine texture of the grid is almost invisible and it seems that the plants are blooming in the air.
The flexibility of the material allows you to realize bold ideas in design design - to form columns, figures in the form of balls, cubes, obelisks. Grids are actively used in the construction of arches, pergolas, trellises. They are easily cut off, with their help it is easy to direct the growth of plants in the right direction. Grids and grids can be installed not only vertically. If they are placed horizontally at a height of 50 cm above the flower garden with gladioli and delphiniums, then the plants will "thrust" their "heads" into them, after they grow up, and there will be no need to tie a peg to each bush.
Supports for climbing plants - options
For the arrangement of the landscape there is a large selection of supports for climbing plants. They are made of metal, plastic, wood, differ in size, shape. Decorative supports for climbing plants can have intricate contours. Supports in the form of spirals, animals, hearts are suitable for ampel colors with small leaves. Stairs-ladders are relevant for lianas. Popular flower beds in the form of baskets, carriages, long pots with vertical screens. The openwork arch will help to beautifully organize the transition between parts of the garden, and the grille - to disguise unsightly places.
Metal supports for plants
Metal supports have a long service life and a high resistance to moisture damage. They will not spoil even in severe frost. Metallic cones, pyramids look imperceptibly, are installed on three or four legs, designed for small plants. In addition, the metal is made of the largest and tallest structures - arches, pergolas under climbing plants, through which the laced corridors are made out.
To create metal products we use fittings, water pipes, iron bars, wire, mesh. The pillars are reinforced in the ground with concrete, which gives the structure stability. The design is painted in a suitable color - white, black or green, which merges with the branches, and forms a beautiful decor element in the garden.
Plastic support for plants
Plastic supports are considered practical. They are light, not afraid of moisture, are made in different colors. Plastic supports for climbing plants are made in the form of ladders, gratings, trellises, arches. Such products do not rust and do not need to be tinted. They can suffer on the street from cold temperatures and become fragile. But plastic products are light, easy to disassemble and for the winter they can be removed to a warm room.
Convenient trellis for climbing plants. It is customary to use it in a small area where it is not possible to mount tall buildings. The trellis is a combination of several interconnected plastic trellises, with its help you can easily organize a pleasant shadow in the heat. If he make a ceiling, you get a cozy gazebo.
Glass-fiber plastic supports for plants
With the help of modern technologies, fiberglass supports for garden climbing plants with a life expectancy of 80 years are created. Due to their high strength and durability, they are gaining popularity among florists and gardeners. Rods, garden pegs, decorative supports for plants made of fiberglass can be purchased from any material, they can be purchased of any size, they are relevant for the construction of high supporting walls, frameworks for arbours. The rods look neat, made in any color, have a smooth surface and do not damage plants.
Such material can simply be stuck in the soil - no corrosion to it is terrible, supports are easily disassembled, and for their storage special conditions are not necessary. Strength of fiberglass elements is enough to build a structure for any plant, even the heaviest and longest vines. They are widely used for erecting skeletons of greenhouses and greenhouses, fixing grapevines.
Supports for plants made of bamboo
Bamboo support for plants - a material widely used in the design of the garden. They are used to fix both large plants and low flowers. Bamboo is made of stairs, arcs, widely used strong stems of different diameters as pillars. The material attracts with its ecological compatibility and durability. The parts are covered with varnish, which protects them from moisture.
Supports of bamboo, covered with plastic, are more durable and are designed for the heaviest and biggest colors. From trunks and sticks, you can build a construction of any geometry, using ropes to fasten the jumpers. Bamboo sticks and arches in the garden are necessary because they help to quickly build an obelisk for clematis, support a rose, send a "lost" escape of a creeper. They are suitable for any plant, naturally appear among foliage.
Wooden supports for climbing plants
Wood supports are the most popular among florists. They are made in the form of ladders or gratings with cells of different sizes in the form of squares, rhombuses, rectangles. Pergola, a lattice or an arch for plants, made of wood, requires appropriate processing. The tree undergoes treatment with solutions that protect against mold and rot.
Bearing supports from wood are inserted into iron cups to avoid their contact with the ground. Then the structure will last a long time, and will only need periodic tinting. Wooden lacquered supports for climbing plants look natural in the design of the garden, and snow-white arches and lattices create a beautiful festive decor.