For a very long time, the use of aprons or under skirts has become fashionable to create a volume for dresses, especially long or medium length. Now often, going to themed parties of the 60s-70s or, making a dress for a solemn event, it becomes necessary, to create the effect of a light airy skirt, to make a magnificent tulle from a tulle .
This article presents several master classes, from which you will learn different ways how to make a tulle from a tulle by yourself.
How to sew a simple tulle from a tulle?
It will take:
- tulleth 3 m;
- fabric 0.5 m;
- elastic band 0.5 m;
- satin ribbon 3 m;
- sewing accessories.
- To determine the width of our parts, you need to measure the length of the skirt and divide it into 3: the fabric will be 1/3 of a width wide, and the tulle will be 2/3.
- Cut out 2 pieces of fabric: the necessary width and length equal to the waist circumference.
- From the tulle cut out the desired width (2/3) and length equal to six waist girths (if necessary, you can sew details of smaller lengths).
- Sew the parts from the fabric on the short side. And on the long side we turn and spread out at a distance of 1-1.5 cm from the edge so that you can insert an elastic band from the upper edge.
- To the underside of the fabric part, tulle is tied, evenly folding.
- Insert a pin or clip into the end of the rubber band and pass it through.
- On the inside, sew fabric and tulle to make a skirt.
- The lower edge of the tulle is edged with a narrow satin ribbon.
- If you make several of these podsubnikov different colors, then combining them, you get a very magnificent rainbow petticoat of tulle.
How to sew a magnificent tulle from a tulle?
It will take:
- lining fabric 1-1,5 m;
- tatin 4,5 m;
- sewing accessories.
- We cut out of the fabric 4 wedges for the base of the jig. Their length should be 4-5 cm less than the length of the skirt itself, and the width - depending on the style. We sew together these details to get a smooth cloth.
- Cut from the tulle strip length of 1.8 m and a width of 30 cm Number of rows of frills depends on the length of the skirt. To calculate the total number of tulle bands we orient ourselves to the fact that for each row of frills we need a different amount of tulle: 1 row - 1.5 strips, 2 rows - 2.0 pieces, 3 rows - 2.5 pieces, 4 rows - 2 pcs., 5 rows - 3.0 pcs, 6 rows - 3.5 pcs., 7 rows - 3.75 pcs., 8 rows - 4 pcs. etc. For the 6 ranks of the obrok we will need 4.5 m tatty.
- Each strip of tulle is folded in half and starting from the bottom, we attach it to the fabric base, while making uniform folds. Each subsequent series of frills should cover the bottom by 3-4 cm.
- When the pod is ready, it can be sewn to the base of the bodice or corset.
- If there is no lining, folds can be sewn onto a base made of tulle. Only so that he does not prick his clothes on the ready crinoline.
You can use different patterns to create the pods.
How to sew a tulle from a tulle pattern?
It will take:
- tatin;
- satin ribbon 2,5 m;
- fabric 0.5 m;
- elastic band 0.5 m;
- sewing accessories.
To create a poduct in the pattern, we will use the rule of increasing each next layer 2 times:
- We make the top layer of the fabric as described in the first master class (item 4).
- Cut from the tulle details of the desired width (1/3 of the length of the skirt) and the length of 2 and 4 girth of your waist.
- A longer strip of tulle (bottom row) is edged with a satin ribbon, we sew the short sides and spend the second edge.
- Pulling the thread, which is stitched strip, we collect, so that uniform folds are formed.
- We sew to the middle row, which was also sewn on the short side before that.
- Sew to the bottom edge of the fabric part. The pantograph is ready.
Sewing a tulle from a tulle by any pattern, we will make the dress more magnificent, than we will emphasize the waist of the girl.
